Plutoos Floor Stand Black for Dyson V15 V12 V11
Plutoos Floor Stand for Dyson — black, freestanding, no drillingFor Dyson V15 V12 V11 · docking place plus 4 accessory hooks✓ No drilling, no wall damage🧹 Vacuum docked and always ready🇨🇭 Swiss stockThis freestanding metal stand gives your Dyson V15, V12 or V11 a fixed home without a single hole in the wall: a stable base plate and a two-part column hold the vacuum docked and ready to grab, and four hooks keep floor heads and nozzles in one place. Screws and the assembly tool are included — set-up takes minutes, and because the wall stays untouched it is ideal for rented flats.The original wall dock assumes you are allowed — and willing — to drill into your wall. With this stand the vacuum parks upright in the hallway or utility room instead of leaning in a corner, and the accessories stop migrating through the household. In black, it stays discreet next to dark furniture and appliances. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Floor stand, blackTwo-part metal column with stable base plate and 4 accessory hooksScrews + assembly toolEverything needed for set-up — no drilling, no wall plugsCompatible vacuum models✓ Dyson V15 (all variants)✓ Dyson V12 (all variants)✓ Dyson V11 (all variants)Assembly in 4 stepsScrew the two column sections together with the included screws.Mount the column upright on the base plate.Hang the four accessory hooks and your attachments in place.Dock the vacuum into the holder — ready.Frequently asked questionsDo I have to fix the stand to the wall or floor?No — the weighted base plate keeps it freestanding and stable on any flat floor; walls stay untouched.Can the vacuum charge while it is docked?Yes — route your original Dyson charging cable to the stand and plug it in as usual, so the vacuum is charged right where it parks.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Turbine Floor Head with Carbon Fibre Roller and LED for Dyson V7 V8 V10 V11 V15 – for carpets and hard floors
Plutoos Electric Turbine Floor Head with Carbon Fibre Roller and LEDCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🧶 Carbon fibre bristles reach deep carpet dirt🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThis direct-drive turbine head carries a roller with stiff carbon fibre bristles: on carpets they agitate deep-seated dirt that airflow alone leaves behind, and on hard floors, tiles and marble the same roller sweeps fine dust reliably into the suction channel. Small LED lights at the front show the way under furniture, the joint swivels 90 degrees for tight corners, and the head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.If your home has rugs and runners, a soft roller alone only flatters them — this is the carpet specialist. The carbon fibre bristles comb the pile instead of gliding over it, which makes this head the ideal second head next to a soft roller for hard floors. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Turbine floor head with carbon fibre rollerDirect-drive roller with LED front lights, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Not compatible with Dyson V6, V12, Slim series and DC models — these use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Carpet specialist: the carbon fibre bristle roller is at its best on carpets and short pile — and also works on hard floors, tiles and marble.Swivels 90 degrees: the flexible joint steers around chair legs and reaches under furniture, with the LED lights showing the way.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the LED lights switch on automatically.Carpets and hard floorsOn carpets, use a higher suction level and guide the head slowly so the bristles can comb the pile. On hard floors a medium level is enough — the roller sweeps fine dust into the suction channel by itself.Care & maintenanceCleaning the rollerRemove hair and threads from the roller regularly; wrapped hair can be cut carefully along the roller with scissors and pulled away.Clearing the suction channelIf pick-up drops, check the opening behind the roller for blockages and remove any debris.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on deep carpetNormal on very deep pile — reduce the suction level so the roller can keep turning.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is it suitable for parquet?Yes, the head also works on hard floors. If your home is exclusively delicate parquet, a soft roller head is the gentler everyday choice — this head is the one for homes with carpets too.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Floor Head with Soft Roller, 4 LED Front Lights and Suspended Wheels for Dyson V7 V8 V10 V11 V15 – for thorough cleaning on hard floors
Plutoos Electric Floor Head with Soft Roller, 4 LED Lights and Suspended WheelsCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original💡 4 LED lights reveal dust🛞 Suspension keeps the roller on the floor🇨🇭 Swiss stockThe full-length soft roller of this motorized floor head takes fine dust and larger crumbs off hard floors in one pass, while four white LED lights at the front reveal dust under furniture before you reach it. Its speciality is the suspension: the large external wheels are spring-mounted and keep the roller pressed evenly onto the floor — even where the surface is slightly uneven. A double swivel joint steers around furniture, and the head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.On smooth floors the difference is not how a head looks but whether the roller keeps full contact — lift-off at the edges is exactly where the dust lines remain. The sprung wheels do that pressing for you on every pass, which makes this the thorough choice among soft roller heads. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Soft roller floor headMotorized full-length soft roller (removable), 4 LED front lights, spring-suspended wheelsCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.The suspension does the pressing: spring-mounted wheels keep the roller in even contact with the floor, so pick-up stays constant across the full width.Removable roller: the soft roller comes out without tools for cleaning; let it dry completely before reinserting.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the LED lights switch on automatically.Where it shinesParquet, tiles, vinyl and stone: guide the head slowly, especially under furniture — the four LEDs show remaining dust in exactly the zones you cannot see from above.Care & maintenanceCleaning the rollerTake the soft roller out, remove hair and threads, and let it dry completely before reinserting. Do not machine-wash the roller.Keeping the lights brightWipe the LED front lights with a dry cloth from time to time — a dusty lens visibly weakens the light.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on carpetNormal on deep carpets — this head is designed for hard floors. Reduce the suction level on rugs.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is it suitable for carpets?It is designed for hard floors and copes with flat rugs; for real carpets a bristle or turbine head is the better tool.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Floor Head with Green LED Light for Dyson V7 V8 V10 V11 V15 – makes fine dust visible
Plutoos Electric Floor Head with Green LED Light — makes fine dust visibleCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original💡 Green light makes dust visible🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThe green LED light of this motorized floor head skims flat across the floor and makes fine dust, hair and crumbs visible that stay invisible under normal room light — you see exactly where it is still dirty and where you are already done. The head clicks directly onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment and is driven by the vacuum itself: no separate battery, no charging, no setup.You know the moment: the floor looks clean — until the evening sun hits it sideways and suddenly every speck shows. That is exactly the effect this head creates on demand, on every pass. A comparable original attachment with dust illumination is only available on the newest, most expensive Dyson models; here you retrofit the same aha-effect onto your existing vacuum for a fraction of the price. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Electric floor head with green LED lightMotorized roller, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Not compatible with Dyson V6, V12, Slim series and DC models — these use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Green light instead of laser: the flat-angled green LED creates the same "dust becomes visible" effect known from the newest Dyson heads.Soft hybrid roller: suitable for hard floors and low-pile carpets; the roller can be removed for cleaning without tools.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the green light switch on automatically.Getting the best light effectThe dust effect is strongest in dim rooms and at a flat viewing angle. Guide the head slowly away from you — the light band in front of the roller shows remaining dust before the roller reaches it.Care & maintenanceCleaning the rollerUnlock the roller cap on the side (coin or slotted screwdriver), pull the roller out, remove hair and threads, and let it dry completely before reinserting. Do not machine-wash the roller.Keeping the light brightWipe the LED strip with a dry cloth from time to time — a dusty lens visibly weakens the light band.TroubleshootingSymptomSolutionRoller or light does not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on carpetNormal on deep carpets — this head is designed for hard floors and low-pile carpets. Reduce the suction level.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is this a laser like on the Dyson V15?It is a green LED positioned at a flat angle — the visual effect is the same principle: fine dust lights up before the roller. It is not a laser diode.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Trigger Lock Clip for Dyson V15 V11 V10 (Detect / Absolute / Animal)
Plutoos Trigger Lock Clip for Dyson V15 V11 V10For Dyson V15 V11 V10 with power trigger · clips on in seconds, no tools✓ No more holding the trigger🖐️ Relieves hand and fingers🇨🇭 Swiss stockThis small red clip slides over the handle of your Dyson V15, V11 or V10 and holds the power trigger pressed — the vacuum runs continuously until you pull the clip off again. It attaches and removes in seconds, needs no tools and leaves no residue or marks on the handle.Holding the trigger through an entire flat is the most common Dyson complaint — and this is the twelve-franc fix. On long sessions, for smaller hands or aching joints, vacuuming becomes noticeably more relaxed the moment the finger can simply rest. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Trigger lock clipRed clip that holds the power trigger pressed — attaches without toolsCompatible vacuum models✓ Dyson V15 (Detect / Absolute / Animal)✓ Dyson V11 (all variants)✓ Dyson V10 (all variants)⚠️ Designed for Dyson V15, V11 and V10 models with a power trigger — models with a start button do not need a trigger lock.Fitting the clip in 3 stepsSlide the clip over the handle, above the power trigger.Press it down until the trigger is held fully — the vacuum keeps running.To stop, simply pull the clip off — the trigger releases immediately.Frequently asked questionsWill the clip damage the handle?No — it clips on and off without tools and leaves no residue or marks on the handle.Does the vacuum behave normally with the clip on?Yes. The clip only holds the trigger mechanically — battery display, suction levels and automatic shut-off work exactly as usual.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Mini Electric Brush for Dyson V7 V8 V10 V11 V15 – for upholstery, mattresses and pet hair
Plutoos Mini Electric Brush — for upholstery, mattresses and pet hairCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🐾 Motor-driven roller pulls hair out of fabric🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThis mini electric brush is a motorized turbo head for your Dyson V7, V8, V10, V11 or V15: a motor-driven bristle roller works pet hair, dust and fibres out of upholstery, mattresses, car seats and stairs instead of just sucking over them. It clicks directly onto the handheld unit or onto the suction pipe like the original attachment and is powered by the vacuum itself — no separate battery, no charging, no setup.Anyone with a cat or dog knows the stubborn film of hair a plain nozzle leaves behind on the sofa. The rotating roller reaches into the fabric and lifts out what airflow alone cannot move — the first pass over the mattress is usually the moment of conversion. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Mini electric brushMotor-driven bristle roller, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the brush clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Handheld or pipe: attach it directly to the handheld unit for sofa, mattress and car — or to the pipe for stairs without bending down.Made for fabric: designed for upholstery, mattresses and textiles; for large floor areas a floor head remains the better tool.Installation & useAttaching the brushRemove the current attachment by pressing its red release button.Click the mini brush onto the handheld unit or the suction pipe until it clicks audibly.Start the vacuum — the bristle roller starts automatically.Best results on fabricGuide the brush slowly in overlapping passes and once against the pile direction — that is when the roller lifts embedded hair. On loose covers, reduce the suction level so the fabric is not pulled in.Care & maintenanceCleaning the rollerRemove wrapped hair and threads from the roller regularly; long hair can be cut carefully along the roller with scissors and pulled away.Keeping the contacts cleanWipe the connector dry from time to time — clean contacts keep the roller starting reliably.TroubleshootingSymptomSolutionRoller does not turnDetach the brush and click it on again firmly — the electrical contacts must sit fully. Remove wrapped hair that may block the roller.Brush sticks to the fabricReduce the suction level — especially on loose covers and soft upholstery.Rattling noiseRemove the roller debris: clear hair and threads from the bearing points at the roller ends.Frequently asked questionsDoes my vacuum recognize the brush automatically?Yes. The brush uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Can I use it on my mattress?Yes — that is exactly its job: the motor-driven roller works dust and hair out of the mattress surface instead of just gliding over it.Does using this brush affect my Dyson warranty?No. The brush is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Floor Stand White for Dyson V15 V12 V11
Plutoos Floor Stand for Dyson — white, freestanding, no drillingFor Dyson V15 V12 V11 · docking place plus 4 accessory hooks✓ No drilling, no wall damage🧹 Vacuum docked and always ready🇨🇭 Swiss stockThis freestanding metal stand gives your Dyson V15, V12 or V11 a fixed home without a single hole in the wall: a stable base plate and a two-part column hold the vacuum docked and ready to grab, and four hooks keep floor heads and nozzles in one place. Screws and the assembly tool are included — set-up takes minutes, and because the wall stays untouched it is ideal for rented flats.The original wall dock assumes you are allowed — and willing — to drill into your wall. With this stand the vacuum parks upright in the hallway or utility room instead of leaning in a corner, and the accessories stop migrating through the household. In white, it blends into bright walls and modern interiors instead of standing out. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Floor stand, whiteTwo-part metal column with stable base plate and 4 accessory hooksScrews + assembly toolEverything needed for set-up — no drilling, no wall plugsCompatible vacuum models✓ Dyson V15 (all variants)✓ Dyson V12 (all variants)✓ Dyson V11 (all variants)Assembly in 4 stepsScrew the two column sections together with the included screws.Mount the column upright on the base plate.Hang the four accessory hooks and your attachments in place.Dock the vacuum into the holder — ready.Frequently asked questionsDo I have to fix the stand to the wall or floor?No — the weighted base plate keeps it freestanding and stable on any flat floor; walls stay untouched.Can the vacuum charge while it is docked?Yes — route your original Dyson charging cable to the stand and plug it in as usual, so the vacuum is charged right where it parks.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Floor Head with Soft Roller and LED Front Lights for Dyson V7 V8 V10 V11 V15 – extra-flat design for hard floors and parquet
Plutoos Electric Floor Head with Soft Roller and LED Lights — extra-flat designCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original📏 Extra-flat — glides under furniture💡 4 LED front lights🇨🇭 Swiss stockThis motorized soft roller head hides its wheels inside the base instead of outside — that makes it extra flat, so it glides under sofas, beds and sideboards where a standard head bumps against the frame. The full-length soft roller takes fine dust and crumbs off hard floors and parquet in one pass, four white LED lights show what is hiding in the dark, and the roller comes out for cleaning. The head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.Under the bed is where dust actually lives — and it is exactly where most floor heads give up. The flat profile turns "we would have to move the sofa" into a single pass, and the LEDs show what was hiding there before the roller picks it up. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Soft roller floor head, extra-flatMotorized full-length soft roller (removable), 4 LED front lights, wheels integrated in the baseCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.The under-furniture specialist: the wheels sit inside the base, so the head is noticeably flatter than a standard head and passes under most sofas and beds with the handle lowered.Removable roller: the soft roller comes out for cleaning; let it dry completely before reinserting.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the LED lights switch on automatically.Reaching under furnitureLower the handle until it is almost flat and guide the head slowly under the furniture — the LED lights show remaining dust in exactly the zones you cannot see from above.Care & maintenanceCleaning the rollerTake the soft roller out, remove hair and threads, and let it dry completely before reinserting. Do not machine-wash the roller.Keeping the lights brightWipe the LED front lights with a dry cloth from time to time — a dusty lens visibly weakens the light.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on carpetNormal on deep carpets — this head is designed for hard floors and parquet. Reduce the suction level on rugs.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Does it really fit under low furniture?The wheels sit inside the base instead of outside, so the head is noticeably flatter than a standard head — with the handle lowered flat it passes under most sofas and beds.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Mop Attachment for Dyson V7 V8 V10 V11 V15 – rotating mop pads, incl. on/off switch
Plutoos Electric Mop Attachment with Rotating Pads — vacuum and mop in one passCompatible with Dyson V7 V8 V10 V11 V15 · incl. free on/off switch clip✓ Clicks on like the original🌀 Two rotating mop pads🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThis electric mop attachment turns your Dyson V7, V8, V10, V11 or V15 into a floor washer: two gear-driven round mop pads rotate under the head and wipe sealed hard floors damp while the vacuum picks up crumbs and dust at the same time. The attachment clicks onto the suction pipe like the original head and is driven by the vacuum itself — no separate battery, no charging, no setup. A free clip-on on/off switch is included, so you no longer have to hold the trigger during the whole session; the improved gear set is made of a harder material for less wear.Vacuuming first, then filling a bucket and crossing the same floor a second time with a mop — that is the round this attachment removes: vacuum and wipe in one pass, and the separate mopping session simply disappears from your evening. The pads are washable and reusable, the switch clip spares your finger on long stretches. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Electric mop attachmentTwo gear-driven rotating pad discs, powered via the vacuum's connector2 × Mop pads, washableRound microfiber pads — rinse, dry, reuse1 × Clip-on on/off switchFree — keeps the trigger pressed for continuous operationCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the attachment clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Pads are washable: rinse the microfiber pads after use and let them dry completely — they are reusable.Damp, not dripping: moisten the pads and wring them out well; sealed hard floors are cleaned with a thin film of moisture, not standing water.Not for deep-pile carpets: use the mop attachment on sealed hard floors — the rotating pads are not intended for carpets.Installation & useAttaching the mop headRemove the current floor head by pressing its red release button.Push the mop attachment onto the suction pipe until it clicks audibly.Moisten the pads, wring them out and press them onto the pad holders.Clip the included on/off switch onto the handle — the vacuum now runs without holding the trigger.Mopping in one passGuide the head slowly in overlapping lanes and work towards the door. The vacuum picks up loose dirt at the front while the rotating pads wipe the floor behind it — one pass replaces the separate mopping round.Care & maintenanceCaring for the mop padsRinse the pads after every use and let them air-dry completely before storing them. Wash without fabric softener — it reduces the microfiber's cleaning effect.Keeping the gear area cleanWipe the pad holders and the area around the gears dry after mopping and remove hair or threads around the pad discs from time to time.TroubleshootingSymptomSolutionPads do not rotateDetach the attachment and click it on again firmly — the electrical contacts must sit fully. Check that both pads are pressed completely onto their holders.Streaks on the floorThe pads are too wet or too dirty: wring them out well or switch to a freshly washed pad.Head is hard to pushToo much water — damp is enough. The pads should glide over the floor, not stick to it.Frequently asked questionsDo I still have to hold the trigger?No — the included clip-on switch holds the trigger for you, so the vacuum and the rotating pads run continuously until you release the clip.Can I add floor cleaner?A small amount of neutral floor cleaner in the wetting water is fine. Avoid strongly foaming or film-building products and never pour liquid into the attachment itself.Does using this attachment affect my Dyson warranty?No. It is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos brush for Miele Complete C1 C2 C3
Plutoos brush for Miele Complete C1 C2 C3 The Plutoos PL11710 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Miele Miele Complete C1, Miele C2, Miele C3, Miele Xiaomi Bodenstaubsauger 35mm. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11710 you save significantly versus OEM parts at matching performance. Package Contents 1 × Plutoos PL11710 brush Compatible Models The Plutoos PL11710 fits drop-in on the following models: Miele Complete C1 Miele C2 Miele C3 Miele Xiaomi Bodenstaubsauger 35mm If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11710? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeFloor brush / brush head Hose fittingsee model list MaterialBristles + plastic housing Installation & use Switch the device off. Open the lock (coin slot or slider depending on model) and remove the old brush. Insert the Plutoos brush/roller and close the lock until it clicks. Direct replacement — no tools needed except possibly a coin. Care & replacement Remove hair and threads regularly with scissors along the groove. Wipe the brush with a damp cloth; keep bearings and contacts dry. Let it dry completely before reinserting. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11710 1. Does the Plutoos PL11710 fit all the listed models? Yes, the Plutoos PL11710 is drop-in compatible with Miele Complete C1, C2, C3, Xiaomi Bodenstaubsauger 35mm. No tools or modification required. 2. When should the brush be replaced? Replace the brush when bristles are visibly worn or it no longer rotates smoothly. Typically every 12-18 months under normal use. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos 3-Piece Plush Strip Set for Dyson V6 V7 V8 V10 V11 V12 V15 & DC Series Soft Rollers
Plutoos 3-Piece Plush Strip Set for Dyson Soft Roller HeadsFor Dyson V6 V7 V8 V10 V11 V12 V15 & DC soft roller floor heads✓ Direct replacement✂️ Cut to length🇨🇭 Swiss stockThe purple plush strips along the front and side edges of a Dyson soft roller head are its wear part: they seal the suction channel against the floor and protect furniture from scratches. When they are worn flat or start fraying, suction on hard floors visibly drops. This set contains three self-adhesive plush strips that replace the worn ones in a few minutes — peel off the old strip, clean the groove, press the new strip in, cut off the excess.A worn strip is the most common reason a soft roller head "suddenly cleans worse" — and the cheapest to fix. For under ten francs you restore the original edge seal instead of replacing the whole head. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails3 × plush strip, self-adhesiveCut to length with scissors — fits all listed head widthsCompatible vacuum models✓ Dyson V6 / V7 (SV11) / V8 (SV10)✓ Dyson V10 / V11✓ Dyson V12 / V15✓ Dyson DC soft roller heads⚠️ For soft roller ("Fluffy") floor heads with plush edge strips — not for bristle-only turbine heads.Replacement in 4 stepsPeel the worn strip out of its groove.Clean the groove — it must be dry and free of adhesive residue.Press the new strip in evenly, adhesive side down.Cut off the excess length with scissors.Frequently asked questionsHow do I know the strips are worn?The plush is pressed flat, frayed or partially missing — and the head slides harder or picks up worse along edges.Will the adhesive hold on the first try?Yes, if the groove is clean and dry. Press firmly along the whole length once after inserting.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Flexible Crevice Nozzle for Dyson V7 V8 V10 V11 V15 – extra-long and bendable for narrow gaps
Plutoos Flexible Crevice Nozzle — extra-long and bendableCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🪄 Bends around obstacles🇨🇭 Swiss stockThis extra-long crevice nozzle bends: the flexible shaft curves around obstacles and reaches into gaps that stay closed to any rigid nozzle — behind and under appliances, between radiator fins, along car seat rails and into sofa slots. It clicks onto the quick-release connector of your Dyson V7, V8, V10, V11 or V15 like the original attachment, on the handheld unit or on the pipe.Behind the fridge, between the car seat and the console — the spots every household quietly postpones, because reaching them means moving heavy things. This nozzle removes the excuse: bend it, reach in, done. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Flexible crevice nozzleExtra-long, bendable shaft with quick-release connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Using the nozzle in 3 stepsClick the nozzle onto the handheld unit or the suction pipe.Bend the shaft along the gap or around the obstacle.Vacuum with slow pulls — narrow gaps need a moment longer.Frequently asked questionsDoes suction stay strong through the long nozzle?The narrow opening concentrates the airflow; for deep gaps simply use a higher suction level.Does it fit the handheld unit directly?Yes — it clicks onto the handheld unit or the suction pipe, whichever reach you need.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Pet Hair Remover Roller — for dog, cat and pet hair on furniture, clothing and car
Plutoos Pet Hair Remover Roller — for dog, cat and pet hair on furniture, clothing and carThe Plutoos Pet Hair Remover Roller reliably removes dog, cat and other pet hair from sofas, beds, clothing, carpets and car seats. Unlike traditional adhesive lint rollers, this tool is fully reusable — no sticky paper, no refills, no consumables.Two rotating brush and silicone rollers collect hair through friction and electrostatic attraction into a built-in storage chamber. A simple press on the top button opens the lid so you can empty the collected hair straight into the bin.With its ergonomic handle and integrated hanging hole, the roller fits any household with pets. Just roll back and forth, empty the chamber, done — no sticky residue, no messy fingertips.What's in the Box1 × Plutoos Pet Hair Remover Roller (self-cleaning, reusable)Integrated collection chamber with push-button lidHanging hole on handleSuitable SurfacesSofas and upholstered furnitureBeds, blankets and cushionsClothing and textilesCarpets and floor matsCar interior (seats, upholstery, trunk)Cat trees and pet bedsWhy Choose PlutoosReusable — no tape refills, no waste, no recurring purchaseSelf-cleaning in seconds — press button, empty chamberWorks both ways — collects hair on the push and the pull strokeElectrostatic brush + silicone wiper — catches fine and coarse hairsErgonomic handle with hanging hole for tidy storageDry use — no batteries, no electricity, no adhesiveTechnical SpecificationsTypeReusable pet hair roller with collection chamberCleaning mechanismElectrostatic brush + silicone wiperEmptyingPush-button lid, manual emptying into binMaterialPlastic housing, brush and silicone rollersPowerNone — manual operationConsumablesNone — fully reusable Installation & use Direct replacement / direct fit — push on until it clicks, no tools. Check the fit before first use (see the compatible-model list above). Care & replacement Wipe with a damp cloth — no aggressive cleaners or abrasives. Let parts dry completely before use. Shipping & ReturnsFree shipping for all ordersNext working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above)60-day return policy for unopened items14-day return policy for opened items (fees apply)Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance PayEco-friendly packagingFrequently Asked Questions1. Do I need adhesive tape refills?No. This Plutoos roller works entirely without adhesive material. Hair is collected mechanically by brushes and silicone wipers and stored in the built-in chamber.2. How do I empty the collection chamber?Press the button on top — the lid opens and you can empty the collected hair straight into the bin. Then press the lid closed until it clicks shut.3. Does it work on delicate fabrics?Yes, the mechanism works without adhesive and without hard bristles. You can use the roller on sofas, upholstery, blankets and clothing. For very delicate fabrics, we recommend testing on a hidden spot first.4. Can I get next-day delivery?Yes, next working day delivery when in stock. Stock and delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping on all orders.
Plutoos 4 × mop pads for Dreame D10 Plus Z10 Pro L10 Plus
Plutoos 4 × mop pads for Dreame D10 Plus Z10 Pro L10 Plus The Plutoos PL11768 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Dreame Dreame D10 Plus, Dreame Z10 Pro, Dreame L10 Plus. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11768 you save significantly versus OEM parts at matching performance. Package Contents 4 × Plutoos PL11768 mop pad Compatible Models The Plutoos PL11768 fits drop-in on the following models: Dreame D10 Plus Dreame Z10 Pro Dreame L10 Plus If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11768? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeMicrofiber mop pad Wash temperatureup to 60°C DryingAir-dry recommended Pack size4 per pack Installation & use Align the pad and press onto the velcro/mount plate, or slide the roller in until it clicks. Dampen briefly before first use — better mopping from the first pass. Direct replacement — no tools needed. Care & replacement Rinse pads under warm water after use and let them air-dry. Machine wash at 30 °C without fabric softener, no dryer — if marked machine-washable. Replace when the fibre is worn or leaves streaks on the floor. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11768 1. Does the Plutoos PL11768 fit all the listed models? Yes, the Plutoos PL11768 is drop-in compatible with Dreame D10 Plus, Z10 Pro, L10 Plus. No tools or modification required. 2. How often should the mop pads be replaced? Mop pads are machine-washable up to 60°C after each use. Replace after 100-150 washes or when the material loses absorbency. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos Universal Robot Mop Floor Cleaner 500 ml = 100 l for iRobot Roborock Ecovacs Dreame Xiaomi & manual mopping — microplastic-free & pet-safe
💧 500 ml = 100 liters of cleaning solutionUniversal for iRobot · Roborock · Ecovacs · Dreame · Xiaomi & manual mopping — a fraction of the per-liter price of ready-to-use cleaners. 🐾 pet-safe 🌊 microplastic-free ✅ ZRC safety-assessed 🌿 plant fragrance A clean floor without effort, a light scent of plant aromas in the room, and the reassuring feeling that everything your robot mop spreads is safe for your family and your four-legged friends — that is exactly what the Plutoos Universal Robot Mop Floor Cleaner is made for. And it is outstanding value for money: one 500 ml bottle gives you a full 100 liters of ready cleaning solution. The balanced formula is 92.85% water-based and works gently but reliably: mild surfactants dissolve everyday dirt, a water softener prevents limescale streaks on tiles and glass, and the plant fragrance leaves a fresh, subtle scent. No microplastics, no aggressive bleach — safe around playing children and sniffing paws. A truly universal solution: compatible with the five big robot mop brands — iRobot, Roborock, Ecovacs, Dreame and Xiaomi — and just as suitable for the classic bucket and manual mop. Exceptionally economical: only 5 ml per 1 liter of water — a fraction of the per-liter price of typical ready-to-use cleaners. Same-working-day dispatch from our Swiss warehouse, delivery mostly the next working day. Compatible robot mop brandsiRobot — Roomba Combo j5/j7/j9, Braava jet m6, all mopping models Roborock — S7, S7 MaxV, S8, S8 Pro Ultra, Qrevo, Saros series Ecovacs — Deebot Ozmo series, X1/X2, T20, T30, N20 Pro Plus Dreame — L10s Ultra, L20 Ultra, X20/X30/X40 Ultra, D series Xiaomi — Mi Robot Vacuum-Mop, X10/X20, Vacuum S10/S20 Note: If unsure about your model, check your robot's manual for "cleaning solution" — if approved, our solution is compatible. Also suitable for manual floor cleaning with bucket and mop. Why this cleaner is good for your home💧 Extremely economical: 5 ml per liter — 500 ml yields ~100 liters of solution, far cheaper per liter than typical ready-to-use cleaners 🌊 Microplastic-free formula: 92.85% water base with fully dissolved ingredients — no plastic particles into the Swiss wastewater system, good for lakes, rivers and drinking water 🐾 Pet-safe formula: independently safety-assessed — no harm on skin contact, no known irritation or sensitization effects. Cats, dogs and rabbits can walk over the dried floor without concern 🌿 Plant fragrance instead of synthetic perfume — subtle, fades after a short drying time 💦 92.85% water base: mild enough for the daily mopping routine 🚿 Water softener against limescale streaks — a real difference in hard-water regions 🦠 Gentle antibacterial effect (bacteriostatic quaternary ammonium salt, only 0.1%) ✅ Independently safety-assessed: ZRC report per ISO 11014-2009 — not classified as hazardous (EC 1272/2008), non-flammable, non-corrosive Package contents1 × Plutoos Universal Robot Mop Floor Cleaner, 500 ml (yields ~100 liters of solution) Usage & dosageWay 1 — directly into the station's solution container (undiluted): If your robot's station has a dedicated container for cleaning solution (e.g. Roborock S8 MaxV Ultra / Qrevo Master & Curv, Dreame X40 Ultra, Ecovacs Deebot X2 Omni — check your manual), pour the solution in directly and undiluted. The station doses and mixes it automatically with every mopping run — no manual mixing needed. Use only if the manufacturer explicitly allows cleaning agents. Way 2 — manual dilution: 5 ml per 1 liter of water into the fresh-water tank. The 500 ml bottle yields ~100 liters of solution — 300–500 mopping runs depending on the model. Way 3 — manual mopping: The same 5 ml per liter works in the bucket for classic hand mopping — one bottle covers robot and manual cleaning. Suitable floors: tiles, laminate, sealed parquet, vinyl, PVC, cork, marble — anything your robot is allowed to mop. Not for untreated wood. Rinse the tank with clear water after use. Care, storage & safetyStore cool, dry and out of reach of children; close the bottle tightly after use. Do not mix with other cleaning agents — especially bleach, strong acids or alkaline cleaners. Do not swallow; avoid eye contact — rinse with water if it occurs. If swallowed, drink water and seek medical advice. Non-flammable; not classified as hazardous (EC 1272/2008, ISO 11014-2009). Certified safety dataClassificationNot classified as hazardous (EC 1272/2008) · non-corrosive · non-flammable · not dangerous goods for transport Skin contactNo harm (per safety data sheet) InhalationNo harm by inhalation (per safety data sheet) Irritation / sensitizationNo known significant effects If swallowedHarmful if swallowed — drink water and seek medical advice; keep out of reach of children Eye contactRinse with plenty of water; seek medical advice Solubility / stabilityFully water-soluble; stable at normal temperature StandardSafety data sheet per ISO 11014-2009, assessed by ZRC (report ZRC2412040XY) Composition (certified)Water (CAS 7732-18-5)92.85%Water softener3.4%Surfactant3%Plant perfume0.3%Solubilizer0.3%Bacteriostatic quaternary ammonium salt0.1%Pigment (coloring)0.05% TroubleshootingProblemSolution Robot leaves too much water on the floorReduce the water-flow level in the robot's app (iRobot, Roborock, Ecovacs, Dreame and Xiaomi all offer a water setting) — or reduce the dosage to 3–4 ml per liter. Robot has no cleaning-agent approvalFor plain water tanks without approval: apply the solution to the mopping pad, not into the tank. Streaks on the floorReduce dosage (3–4 ml/l, especially with soft water); wash the pads — residues of old cleaners cause streaking. Smell in the tankEmpty the tank, rinse with clear water, let it dry open; do not leave solution in the tank for weeks. Station not dosingRinse the compartment and intake with warm water — remove dried-on residue. Shipping & returns✓ Free shipping (CH/FL) · ✓ Next-working-day delivery (latest the 2nd) · ✓ 60-day returns (unopened) · ✓ 14-day returns (opened, fees apply) · ✓ TWINT, PostFinance, Visa, Mastercard, invoice · ✓ Eco-friendly packaging FAQ❓ Does this cleaner really work with all major robot mop brands?Yes — the mild, balanced formula is safe for the pumps, hoses and pads of iRobot, Roborock, Ecovacs, Dreame and Xiaomi. It does not attack seals, leaves no residue and does not over-foam. If unsure, check your manual — if "cleaning solution" is approved, ours is compatible. ❓ Is the solution really pet-safe?Yes. No microplastics, no aggressive bleach or solvents; the bacteriostatic agent is used at a low 0.1% — cats, dogs and small animals can walk on the dried floor without concern. Still: do not let pets drink it, keep the bottle out of reach. ❓ How many mopping runs does a 500 ml bottle give?At 5 ml per liter the bottle yields around 100 liters of solution — about 300–500 mopping runs depending on the robot, typically several months of routine cleaning for an 80–100 m² home. ❓ On which floors can I use it?All hard floors your robot is approved to mop: tiles, laminate, sealed parquet, vinyl, PVC, cork, marble, natural stone. Not for untreated wood or open-pored natural materials. If unsure, test on an inconspicuous spot first. ❓ How fast is delivery?Ordered before 5 p.m. and in stock: your order leaves our Swiss warehouse the same working day — delivered mostly the next working day, latest the 2nd. Free shipping across Switzerland and Liechtenstein. Live stock and the expected delivery date are shown at the top next to the add-to-cart button — if an item is out of stock, we deliver as soon as possible, usually within 15 days.
Plutoos Mini Electric Brush with Anti-Tangle Roller for Dyson V7 V8 V10 V11 V15 – for pet hair, upholstery and mattresses
Plutoos Mini Electric Brush with Anti-Tangle Roller — hair spirals off instead of wrappingCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🌀 Anti-tangle screw rollers — no wrapped hair🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThe conical screw rollers of this mini electric brush are its trick: hair is guided along the spiral towards the roller ends and straight into the airflow instead of wrapping around the middle. Motor-driven, the brush works pet hair and fibres out of upholstery, mattresses, stairs and car seats — and clicks onto the handheld unit or the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment, powered by the vacuum, no battery, no setup.Pet households know the ritual: scissors out, cut the wrapped hair off the roller, pick the bearings clean. The screw design ends exactly that. Compared to a classic mini brush with a straight roller, this is the anti-tangle upgrade for homes where hair is a daily topic. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Anti-tangle mini electric brushConical screw rollers, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the brush clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Anti-tangle by geometry: the conical screw rollers guide hair to the roller ends where the airflow takes it — nothing left to cut free.Handheld or pipe: attach it directly to the handheld unit for sofa, mattress and car — or to the pipe for stairs without bending down.Installation & useAttaching the brushRemove the current attachment by pressing its red release button.Click the brush onto the handheld unit or the suction pipe until it clicks audibly.Start the vacuum — the screw rollers start automatically.Best results on fabricGuide the brush slowly in overlapping passes and once against the pile direction — that is when the rollers lift embedded hair. On loose covers, reduce the suction level.Care & maintenanceChecking the rollersGlance at the roller ends from time to time and pull away any threads that have caught there — with the screw geometry that is normally all the cleaning the rollers need.Keeping the contacts cleanWipe the connector dry from time to time — clean contacts keep the rollers starting reliably.TroubleshootingSymptomSolutionRollers do not turnDetach the brush and click it on again firmly — the electrical contacts must sit fully. Remove any thread blocking the rollers.Hair gathers at the roller endsThat is the design working: the spiral guides hair to the ends where the airflow picks it up. Pull away anything that stays caught.Brush sticks to the fabricReduce the suction level — especially on loose covers and soft upholstery.Frequently asked questionsDoes my vacuum recognize the brush automatically?Yes. The brush uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.What is the difference to the classic mini brush?The classic version uses a straight bristle roller that long hair can wrap around; this one uses conical screw rollers that guide hair to the ends and into the airflow — the upgrade for pet households.Does using this brush affect my Dyson warranty?No. The brush is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Brush Head with Combi Roller and Front Lights for Dyson V7 V8 V10 V11 V15 – for short-pile carpets and hard floors
Plutoos Brush Head with Combi Roller and Front Lights — one head for hard floors and short-pile carpetsCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🔀 One roller for hard floors and carpets🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThe combi roller of this motorized brush head pairs a soft plush base with raised red agitator strips: the plush sweeps fine dust off parquet and tiles while the strips comb short-pile carpets and runners — in the same pass, without changing heads. Front lights show the way under furniture, small side wheels keep it gliding, and the roller comes out for cleaning without fuss. The head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.Mixed floors are the reality of most homes: parquet in the living room, a runner in the hallway, tiles in the kitchen. Instead of swapping heads at every doorway, the combi roller simply keeps going — the all-rounder if you only want to own one floor head. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Combi roller floor headMotorized combi roller (plush + agitator strips, removable), front lights, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.One roller, two floor types: the plush base cleans hard floors while the raised agitator strips comb short-pile carpets — no head change at the doorway.Easy disassembly: the roller comes out without fuss for removing hair and threads; let it dry completely before reinserting.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the front lights switch on automatically.Mixed floorsSimply keep vacuuming across the transitions from hard floor to runner — raise the suction level on carpet, and back down on parquet and tiles.Care & maintenanceCleaning the rollerTake the combi roller out, remove hair and threads from plush and strips, and let it dry completely before reinserting.Keeping the lights brightWipe the front lights with a dry cloth from time to time — a dusty lens visibly weakens the light.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on deep carpetThis head is made for short pile — on deep carpets reduce the suction level so the roller can keep turning.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Does it work on deep-pile carpets too?Its home ground is hard floors and short-pile carpets. For deep pile, a dedicated turbine head with stiff bristles is the better tool.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 5 × mop pads for Roborock S4 S5 S6
Plutoos 5 × mop pads for Roborock S4 S5 S6 The Plutoos PL11827 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Roborock Roborock S4, Roborock S5, Roborock S6, Roborock Q7, Roborock Q8. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11827 you save significantly versus OEM parts at matching performance. Package Contents 5 × Plutoos PL11827 mop pad Compatible Models The Plutoos PL11827 fits drop-in on the following models: Roborock S4 Roborock S5 Roborock S6 Roborock Q7 Roborock Q8 If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11827? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeMicrofiber mop pad Wash temperatureup to 60°C DryingAir-dry recommended Pack size5 per pack Installation & use Align the pad and press onto the velcro/mount plate, or slide the roller in until it clicks. Dampen briefly before first use — better mopping from the first pass. Direct replacement — no tools needed. Care & replacement Rinse pads under warm water after use and let them air-dry. Machine wash at 30 °C without fabric softener, no dryer — if marked machine-washable. Replace when the fibre is worn or leaves streaks on the floor. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11827 1. Does the Plutoos PL11827 fit all the listed models? Yes, the Plutoos PL11827 is drop-in compatible with Roborock S4, S5, S6, Q7, Q8. No tools or modification required. 2. How often should the mop pads be replaced? Mop pads are machine-washable up to 60°C after each use. Replace after 100-150 washes or when the material loses absorbency. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos brush for Universal 35mm
Plutoos brush for Universal 35mm The Plutoos PL11855 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Universal 35mm. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11855 you save significantly versus OEM parts at matching performance. Package Contents 1 × Plutoos PL11855 brush Compatible Models The Plutoos PL11855 fits drop-in on the following models: Universal 35mm If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11855? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeFloor brush / brush head Hose fittingsee model list MaterialBristles + plastic housing Installation & use Switch the device off. Open the lock (coin slot or slider depending on model) and remove the old brush. Insert the Plutoos brush/roller and close the lock until it clicks. Direct replacement — no tools needed except possibly a coin. Care & replacement Remove hair and threads regularly with scissors along the groove. Wipe the brush with a damp cloth; keep bearings and contacts dry. Let it dry completely before reinserting. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11855 1. Does the Plutoos PL11855 fit all the listed models? Yes, the Plutoos PL11855 is drop-in compatible with Universal 35mm. No tools or modification required. 2. When should the brush be replaced? Replace the brush when bristles are visibly worn or it no longer rotates smoothly. Typically every 12-18 months under normal use. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos nozzle for Universal 35mm 32mm
Plutoos nozzle for Universal 35mm 32mm The Plutoos PL11857 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Universal 35mm, 32mm. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11857 you save significantly versus OEM parts at matching performance. Package Contents 1 × Plutoos PL11857 nozzle Compatible Models The Plutoos PL11857 fits drop-in on the following models: Universal 35mm 32mm If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11857? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeUniversal nozzle Fitting35 mm + 32 mm adapter Installation & use Direct replacement / direct fit — push on until it clicks, no tools. Check the fit before first use (see the compatible-model list above). Care & replacement Wipe with a damp cloth — no aggressive cleaners or abrasives. Let parts dry completely before use. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11857 1. Does the Plutoos PL11857 fit all the listed models? Yes, the Plutoos PL11857 is drop-in compatible with Universal 35mm, 32mm. No tools or modification required. 2. What hose size does the nozzle fit? Standard 35 mm connection fits most European vacuums; the included adapter also fits 32 mm. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos brush for Universal 35mm
Plutoos brush for Universal 35mm The Plutoos PL11856 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Universal 35mm. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11856 you save significantly versus OEM parts at matching performance. Package Contents 1 × Plutoos PL11856 brush Compatible Models The Plutoos PL11856 fits drop-in on the following models: Universal 35mm If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11856? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeFloor brush / brush head Hose fittingsee model list MaterialBristles + plastic housing Installation & use Switch the device off. Open the lock (coin slot or slider depending on model) and remove the old brush. Insert the Plutoos brush/roller and close the lock until it clicks. Direct replacement — no tools needed except possibly a coin. Care & replacement Remove hair and threads regularly with scissors along the groove. Wipe the brush with a damp cloth; keep bearings and contacts dry. Let it dry completely before reinserting. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11856 1. Does the Plutoos PL11856 fit all the listed models? Yes, the Plutoos PL11856 is drop-in compatible with Universal 35mm. No tools or modification required. 2. When should the brush be replaced? Replace the brush when bristles are visibly worn or it no longer rotates smoothly. Typically every 12-18 months under normal use. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.
Plutoos accessory set for Universal 35mm
Plutoos accessory set for Universal 35mm The Plutoos PL11854 is a high-quality Plutoos replacement part — drop-in compatible, durable, and a precise fit for Universal 35mm. Ships from Switzerland with 1-3 day delivery. Before shipping, Plutoos checks every part for fit and function. You swap without tools or modification. With the Plutoos PL11854 you save significantly versus OEM parts at matching performance. Package Contents 1 × Plutoos PL11854 accessory set (6 pieces) Compatible Models The Plutoos PL11854 fits drop-in on the following models: Universal 35mm If you're unsure about your model: contact Plutoos — we'll check compatibility for you. Why Choose the Plutoos PL11854? Drop-in fit: precise — no tools, no modification Plutoos quality: tested for fit and function before shipping Cost advantage: significantly cheaper than OEM parts Ships from Switzerland: same-day dispatch for orders before 17:00 Free shipping: all orders 60-day return policy: on unopened items Technical Data TypeAccessory kit Piece count6 pieces Installation & use All parts are direct replacements for the originals — switch off the robot/station. Remove the old part (filter, brush, pad or bag) and insert the Plutoos part until it clicks. No tools needed; the manufacturer's app also shows part-replacement guides. Care & replacement Filters: rinse cold monthly (no soap) and let dry for 24 h. Brushes: remove hair with scissors, wipe with a damp cloth. Mop pads: wash out and air-dry; dust bags: single use. Tip: rotate wear parts every 3–6 months — keeps suction and mopping performance constant. Shipping & Returns Free shipping for all orders Next working day delivery when in stock (stock and delivery date shown near the "Add to Cart" button above) 60-day return policy for unopened items 14-day return policy for opened items (fees apply) Secure payments via PostFinance Payment Gateway, TWINT, Mastercard, Visa, Google Pay and PostFinance Pay Eco-friendly packaging Frequently Asked Questions about the Plutoos PL11854 1. Does the Plutoos PL11854 fit all the listed models? Yes, the Plutoos PL11854 is drop-in compatible with Universal 35mm. No tools or modification required. 2. What is included in the accessory set? The set contains the key wear parts for maintaining your robot vacuum. See Package Contents above for what's included. 3. Are these genuine OEM parts or compatible replacements? Compatible replacements from Plutoos. The Plutoos parts match OEM specifications and fit drop-in. The main difference is price — compatible is significantly cheaper than the original. 4. Does Plutoos deliver in Switzerland? Yes, next working day delivery if the item is in stock. The current stock availability and expected delivery date are shown directly near the "Add to Cart" button at the top of this page. Free shipping for all orders. 5. Does using compatible accessories void my vacuum warranty? No. Under EU and Swiss consumer law, the use of compatible replacement parts cannot void a vacuum's warranty unless the part is proven to have caused damage. Plutoos does not assume responsibility for device-side issues — the use of compatible parts is at the customer's own discretion and responsibility.