Plutoos HEPA Filter for Dyson V7 V8 Absolute V8 Animal – washable & reusable
HEPA Filter for Dyson V7 / V8 Absolute / V8 Animal — breathe easy while you vacuumFits Dyson V8 · V8 Absolute · V8 Animal · V7 · V7 Absolute · V7 Motorhead — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Dyson V8, V8 Absolute and V8 Animal: the Plutoos PL11686 replaces the tired filter that has been quietly throttling your Dyson. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.You empty the bin, and the V8 still pulls like it is half asleep — because the bottleneck is not the bin, it is the saturated filter behind it. This Plutoos filter clears the airway: factory suction returns, and the HEPA-class layers hold pollen, dust-mite allergens and fine dust from 0.3 µm. Drop-in fit without tools, washable in cold water without detergent, and tested for seat and filtration before it leaves the warehouse.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V8 · V8 Absolute · V8 Animal✓ Dyson V7 · V7 Absolute · V7 Motorhead⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11686 fit all the models listed?Yes — it is a drop-in fit for Dyson V8, V8 Absolute, V8 Animal, V7 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Dyson V11 V15 SV14 SV17 SV22 – washable & reusable
3 × HEPA Filter for Dyson V11 / SV17 / V15 — suction like on day oneFits Dyson V11 · SV17 · V15 · SV14 · SV22 — washable, HEPA class, three changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11673 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V11, SV17 and V15 at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.If vacuuming makes you sneeze, the machine is usually blowing back what it should be keeping: a saturated filter lets fine dust straight through the exhaust. With a fresh Plutoos filter the V11 pulls like it did out of the box — and the air behind it stays clean. At the recommended 3–6-month rhythm this 3-pack covers around a year of changes, often more, in one order instead of three. Each filter is tested for seat and filtration before dispatch, and if anything is unclear our Swiss team is one email away.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V11 · SV17 · V15✓ Dyson SV14 · SV22⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11673 fit all the models listed?Yes — it is a drop-in fit for Dyson V11, SV17, V15, SV14 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Dyson V12 Detect Slim Absolute – washable & reusable
3 × HEPA Filter for Dyson V12 Detect Slim — suction like on day oneFits Dyson V12 · V12 Detect Slim · Absolute · Total Clean — washable, HEPA class, a year of changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11678 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V12, V12 Detect Slim and Absolute at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A V12 that whistles at full boost and still leaves grit at the carpet edge is not getting weaker — it is suffocating behind a saturated filter. Give it a fresh Plutoos filter and the airflow, and the pickup, come back at once. At the recommended 3–6-month rhythm this 3-pack means around a year of changes from a single order, and every filter is washable in cold water to stretch its life further. Tested for seat and filtration before dispatch; 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V12 · V12 Detect Slim · Absolute · Total Clean⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11678 fit all the models listed?Yes — it is a drop-in fit for Dyson V12, V12 Detect Slim, Absolute, Total Clean. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × HEPA Filters for Dyson V10 SV12 Animal Absolute Motorhead – washable & reusable
4 × HEPA Filter for Dyson V10 — a year of clean suction in one boxFits Dyson V10 · Animal · Absolute · Motorhead · Cyclone · Total Clean · SV12 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11725 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V10, V10 Animal and V10 Absolute at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A V10 that vacuums daily eats through filters — and the day the filter indicator triggers is never the day you have a spare at home. This 4-pack fixes that for a long time: at the recommended 3–6-month rhythm you are set for a year and comfortably beyond, one order, no repeat shipping. Every filter is washable in cold water, holds ≥99.5% of particles from 0.3 µm, and clicks in without tools. Tested for seat and filtration before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count4 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V10 · V10 Animal · V10 Absolute✓ Dyson V10 Motorhead · V10 Cyclone · V10 Total Clean · SV12⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11725 fit all the models listed?Yes — it is a drop-in fit for Dyson V10, V10 Animal, V10 Absolute, V10 Motorhead and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × Pre-Filters for Dyson DC33 DC37 DC39 – washable & reusable
2 × Pre-Filter for Dyson DC33 / DC37 / DC39 — fresh pull, drop-in fitFits Dyson DC33 · DC37 · DC39 — washable in cold water, 2 per pack✓ Drop-in fit like the original🧼 Washable — cold water💰 Clearly cheaper than the original part🇨🇭 Swiss stockThe Plutoos PL11724 is a precision-fit pre-filter for Dyson DC33, DC37 and DC39 — a genuine drop-in part: pull out the used filter, fit the new one, no tools, no modification. It is washable under cold water, every part is checked for fit and function before dispatch, and it costs clearly less than the original manufacturer part.When tapping out the pre-filter no longer helps, it is simply full — months of dust have packed it, and the DC's pull fades earlier every session. A fresh Plutoos pre-filter restores the old pull: exact drop-in fit for DC33, DC37 and DC39, and with two in the pack the next change is already on the shelf. Rinse the used one cold, let it dry fully, and it serves as your rotation spare. 60-day return on unopened items — and our Swiss team is one email away.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypePre-filterWashableYes — cold waterPack count2 per packCompatible vacuum models✓ Dyson DC33 · DC37 · DC39⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementCleaning the pre-filterTap the pre-filter out or rinse it under cold running water — no soap, no brush. Monthly is a good rhythm in regular use.Drying before refittingLet it air-dry completely — at least 24 hours, better 48 — before it goes back in. A damp filter can damage the motor.When to replaceReplacement is recommended every 6 months — or when the filter stays grey after washing or suction keeps fading; depending on use that is every 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11724 fit all the models listed?Yes — it is a drop-in fit for Dyson DC33, DC37, DC39. No tools, no modification needed.How often should the pre-filter be changed?Replacement is recommended every 6 months — or, with regular washing, when the filter stays grey after rinsing or suction keeps fading; depending on use every 6–12 months.Can the pre-filter be washed?Yes — tap it out or rinse it under cold water, without soap or a brush, and let it dry completely before refitting; a damp filter can damage the motor.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Miele Complete C3 Powerline S8340 – washable & reusable
2 × HEPA Filter for Miele Complete C3 Powerline — the 'just vacuumed' feeling, in the air tooFits Miele Complete C3 Powerline · S8340 — washable, HEPA class, two changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockEvery Miele is only as good as its filter. The Plutoos PL11711 is the drop-in replacement for Miele Complete C3 Powerline and S8340 — and because filters are wear parts that clog with fine dust, pollen and pet hair, a change every three to six months keeps suction at factory level and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.The living room looks vacuumed — but the air feels dusty, and sunlight through the window shows it dancing. That is a saturated filter passing fine dust back out of your Miele. With a fresh Plutoos HEPA filter the exhaust runs clean again: pollen, dust-mite allergens and fine dust from 0.3 µm stay in the filter layers. The 2-pack sets you up for two change cycles — or one filter in use while the washed one dries. Drop-in fit, no tools, and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Miele Complete C3 Powerline · S8340⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11711 fit all the models listed?Yes — it is a drop-in fit for Miele Complete C3 Powerline, S8340. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Dyson V7 V8 Animal – washable & reusable
HEPA Filter for Dyson V7 / V8 Animal — clean exhaust air againFits Dyson V7 · V8 · V8 Animal · V8 Absolute · V8 Motorhead — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Dyson's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11683 is the direct replacement for Dyson V7, V8 and V8 Animal: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.In a household with pets, the V8's filter works overtime: hair and fine dust pack the layers, and at some point your eyes itch every time you vacuum. This Plutoos HEPA filter takes the exhaust air back to clean — pet hair and fine dust stay in the filter instead of drifting through the flat. Swap it in under a minute without tools, rinse it monthly in cold water, and pay clearly less than for the original part.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V7 · V8 · V8 Animal✓ Dyson V8 Absolute · V8 Motorhead⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11683 fit all the models listed?Yes — it is a drop-in fit for Dyson V7, V8, V8 Animal, V8 Absolute and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × HEPA Filters for Dreame L10s Ultra L10 Ultra L10s Pro Robot Vacuum – washable
4 × HEPA Filter for Dreame L10s — set for a year of daily cleaningFits Dreame L10s Ultra · L10 Ultra · L10s Pro · D10 Plus — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11767 is a high-quality replacement filter for your Dreame vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dreame L10s Ultra, L10 Ultra and L10s Pro at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A robot vacuum cleans while nobody is watching — and nobody notices its filter silting up until the floors stop feeling properly clean. Four fresh Plutoos filters keep the Dreame at factory suction with clean exhaust: fine dust and pollen from 0.3 µm stay in the HEPA layers, not in the room. At the recommended rhythm, the 4-pack covers a year and comfortably more of daily runs in one order. Washable, drop-in fit, tested before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count4 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dreame L10s Ultra · L10 Ultra · L10s Pro · D10 Plus⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11767 fit all the models listed?Yes — it is a drop-in fit for Dreame L10s Ultra, L10 Ultra, L10s Pro, D10 Plus. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Kärcher WD4 WD5 WD6 Wet/Dry Vacuum – washable
2 × HEPA Filter for Kärcher WD4 / WD5 / WD6 — bring back the big pullFits Kärcher WD4 · WD5 · WD6 — washable, HEPA class, spare included✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11732 is a high-quality replacement filter for your Kärcher vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Kärcher WD4, WD5 and WD6 at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.Sawdust in the garage, gravel from the car boot, the aftermath of every small disaster in the basement — the Kärcher swallows it all until its filter silts up and the hose barely whispers. Swap in a fresh Plutoos filter and it pulls properly again; wash the used one in cold water and it returns to duty. Two in the pack: one working, one in reserve. Drop-in fit for WD4, WD5 and WD6 — no tools, and clearly cheaper than the original part.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Kärcher WD4 · WD5 · WD6⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11732 fit all the models listed?Yes — it is a drop-in fit for Kärcher WD4, WD5, WD6. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Dyson DC30 DC31 DC34 – washable & reusable
2 × HEPA Filter for Dyson DC30 / DC31 / DC34 — small vac, clean airFits Dyson DC30 · DC31 · DC34 · DC35 · DC44 · DC45 · DC56 · DC57 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Dyson DC30, DC31 and DC34: the Plutoos PL11727 replaces the tired filter that has been quietly throttling your Dyson. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.Car seats, sofa corners, stairs — the compact Dyson works in the tightest spots, with your nose right beside the exhaust. All the more reason for a fresh filter: this Plutoos 2-pack keeps the little machine at factory suction and holds fine dust from 0.3 µm in the filter rather than in the car. One filter in use, the washed one drying — the rotation never leaves you without. Drop-in fit, no tools, tested before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson DC30 · DC31 · DC34✓ Dyson DC35 · DC44 · DC45✓ Dyson DC56 · DC57⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11727 fit all the models listed?Yes — it is a drop-in fit for Dyson DC30, DC31, DC34, DC35 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Philips SpeedPro Aqua FC8009 Cordless Vacuum – washable
2 × HEPA Filter for Philips SpeedPro / SpeedPro Aqua — full suction to the last roomFits Philips SpeedPro · SpeedPro Aqua · FC8009 · FC8010 — washable, HEPA class, smart two-filter rotation✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Philips SpeedPro, SpeedPro Aqua and FC8009: the Plutoos PL11675 replaces the tired filter that has been quietly throttling your Philips. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.When the SpeedPro starts strong in the hallway and gives up by the bedroom — going over the same crumbs twice — the filter is saturated. A fresh Plutoos filter brings the pull back for the whole flat, and because this is a 2-pack you can run the smart rotation: one filter in the vacuum while the freshly washed one dries. HEPA-class filtration keeps fine dust and pollen in the filter instead of in the room air. Drop-in fit, no tools — and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Philips SpeedPro · SpeedPro Aqua · FC8009 · FC8010⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11675 fit all the models listed?Yes — it is a drop-in fit for Philips SpeedPro, SpeedPro Aqua, FC8009, FC8010. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Dyson CY18 CY22 CY23 Cyclone Vacuum – washable
HEPA Filter for Dyson CY18 / CY22 / CY23 — retire the dusty smellFits Dyson CY18 · CY22–CY28 · DY75 · DY77 · DY78 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Dyson's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11726 is the direct replacement for Dyson CY18, CY22 and CY23: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.If the Dyson announces itself with a warm, dusty smell the moment it starts, the filter is past its best — the air stream is pushing months of fine dust back through saturated layers. A fresh Plutoos HEPA filter ends it: the exhaust runs clean, with ≥99.5% of particles from 0.3 µm held in the filter. One-minute drop-in swap, washable in cold water without detergent, clearly cheaper than the original — and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson CY18 · CY22 · CY23✓ Dyson CY24 · CY25 · CY26✓ Dyson CY27 · CY28 · DY75✓ Dyson DY77 · DY78⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11726 fit all the models listed?Yes — it is a drop-in fit for Dyson CY18, CY22, CY23, CY24 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
![Plutoos 3 Filter für Kärcher Staubsauger [WD4, WD5, WD6 / MV4, MV5, MV6] – 3 Flachfaltenfilter](https://plutoos.ch/media/c0/a6/4c/1747628519/pl11730.jpg?ts=1750100859 "PL11730")
Plutoos 3 × HEPA Filters for Kärcher WD4 WD5 WD6 Wet/Dry Vacuum – washable
3 × HEPA Filter for Kärcher WD4 / WD5 / WD6 — ready for the next dusty jobFits Kärcher WD4 · WD5 · WD6 · MV4 · MV5 · MV6 — washable, HEPA class, three changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockEvery Kärcher is only as good as its filter. The Plutoos PL11730 is the drop-in replacement for Kärcher WD4, WD5 and WD6 — and because filters are wear parts that clog with fine dust, pollen and pet hair, a change every three to six months keeps suction at factory level and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.Renovation weekends are what a Kärcher is for — and what fills its filter fastest: fine dust packs the layers until the machine wheezes instead of pulls. With this 3-pack a fresh Plutoos filter is always within reach: washable in cold water, drop-in fit without tools, and at the recommended rhythm one order covers around a year of jobs. Tested for seat and filtration before dispatch; 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Kärcher WD4 · WD5 · WD6✓ Kärcher MV4 · MV5 · MV6⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11730 fit all the models listed?Yes — it is a drop-in fit for Kärcher WD4, WD5, WD6, MV4 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Philips FC9332 FC9331 FC8010 – washable & reusable
HEPA Filter for Philips FC9332 / FC9331 / FC8010 — clean exhaust air for pollen seasonFits Philips FC9332 · FC9331 · FC8010 · FC9555 · FC9550 · FC9334 · FC9333 · FC9330 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Philips FC9332, FC9331 and FC8010: the Plutoos PL11716 replaces the tired filter that has been quietly throttling your Philips. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.In pollen season, vacuuming with a saturated filter spreads the misery: what the brush collects, the exhaust hands straight back to the room. This Plutoos HEPA filter holds pollen, dust-mite allergens and fine dust from 0.3 µm in its layers — clean exhaust air, which matters most to allergy sufferers. The swap takes a minute without tools; monthly cold-water rinses keep it working between the recommended changes. Clearly cheaper than the original part.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Philips FC9332 · FC9331 · FC8010✓ Philips FC9555 · FC9550 · FC9334✓ Philips FC9333 · FC9330⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11716 fit all the models listed?Yes — it is a drop-in fit for Philips FC9332, FC9331, FC8010, FC9555 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
![Plutoos 3 Filter for Karcher Vacuum Cleaners [WD3, WD2, WD1, MV3, MV2, A, K, KNT, NT, SE, VC] - 1 Ro](https://plutoos.ch/media/65/c4/d8/1747603393/71nq87szbnl-_ac_sl1500_.jpg?ts=1750100855 "71nq87SzBNL-_AC_SL1500_")
Plutoos HEPA Filter for Kärcher WD3 WD2 WD1 Wet/Dry Vacuum – washable
HEPA Filter for Kärcher WD3 / WD2 / WD1 — full suction for the dirty jobsFits Kärcher WD1 · WD2 · WD3 · MV2 · MV3 · A · K · KNT · NT · SE · VC — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11714 is a high-quality replacement filter for your Kärcher vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Kärcher WD3, WD2 and WD1 at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.Halfway through a cellar clear-out the Kärcher's pull collapses — fine dust has packed the filter, and the machine breathes through a straw. This Plutoos HEPA filter gives it its lungs back and holds the finest dust from 0.3 µm in the filter instead of in the room air. Fitted drop-in without tools, washable in cold water for round after round — and clearly cheaper than the original part. Tested for seat and filtration before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Kärcher WD3 · WD2 · WD1✓ Kärcher MV3 · MV2 · A✓ Kärcher K · KNT · NT✓ Kärcher SE · VC⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11714 fit all the models listed?Yes — it is a drop-in fit for Kärcher WD3, WD2, WD1, MV3 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Grundig VCH9929L VCH9929 VCH9930 – washable & reusable
HEPA Filter for Grundig VCH9929L / VCH9929 / VCH9930 — clean exhaust air againFits Grundig VCH9929L · VCH9929 · VCH9930 · VCH9931 · VCH9932 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Grundig's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11674 is the direct replacement for Grundig VCH9929L, VCH9929 and VCH9930: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.That stale, dusty note the moment the Grundig starts is the filter talking: months of fine dust sit in its layers, and the warm exhaust air carries the smell into the room. Swap in this Plutoos filter and the machine smells of nothing again — while HEPA-class filtration keeps pollen and fine dust where they belong. Fitted in under a minute, washable in cold water, and clearly cheaper than the original part. 60-day return on unopened items.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Grundig VCH9929L · VCH9929 · VCH9930✓ Grundig VCH9931 · VCH9932⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11674 fit all the models listed?Yes — it is a drop-in fit for Grundig VCH9929L, VCH9929, VCH9930, VCH9931 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Dyson V12 Detect Slim Absolute – washable & reusable
2 × HEPA Filter for Dyson V12 Detect Slim — light vac, clean finishFits Dyson V12 · V12 Detect Slim · Absolute · Total Clean — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11906 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V12, V12 Detect Slim and Absolute at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.You vacuumed last night — so why does the morning sun still show dust drifting where the V12 passed? A saturated filter returns the finest particles to the air even while pickup looks fine. This Plutoos 2-pack closes the loop: the HEPA layers hold dust and pollen from 0.3 µm, one filter runs while the washed one dries, and the swap is a drop-in of seconds. Tested for seat and filtration before dispatch; 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V12 · V12 Detect Slim · Absolute · Total Clean⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11906 fit all the models listed?Yes — it is a drop-in fit for Dyson V12, V12 Detect Slim, Absolute, Total Clean. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Philips SpeedPro Max Aqua Plus Cordless Vacuum – washable
3 × HEPA Filter for Philips SpeedPro Max Aqua Plus — full power for the daily roundFits Philips SpeedPro Max Aqua Plus — washable, HEPA class, three changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Philips's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11814 is the direct replacement for Philips SpeedPro Max Aqua Plus: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.The machine that does the daily crumb round earns its filter change sooner than any other — and shows a saturated filter first, with pickup fading mid-kitchen. Three fresh Plutoos filters keep the SpeedPro Max Aqua Plus at factory suction for roughly a year of changes at the recommended rhythm, from a single order. The HEPA layers hold fine dust and pollen from 0.3 µm; each filter washes clean under cold water. Drop-in fit, no tools, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Philips SpeedPro Max Aqua Plus⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11814 fit all the models listed?Yes — it is a drop-in fit for Philips SpeedPro Max Aqua Plus. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Grundig VCH9629 VCH9630 VCH9631 – washable & reusable
HEPA Filter for Grundig VCH9629 / VCH9630 / VCH9631 — factory suction, fresh airFits Grundig VCH9629 · VCH9630 · VCH9631 · VCH9632 · VCH9832 · VCH9829 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockEvery Grundig is only as good as its filter. The Plutoos PL11676 is the drop-in replacement for Grundig VCH9629, VCH9630 and VCH9631 — and because filters are wear parts that clog with fine dust, pollen and pet hair, a change every three to six months keeps suction at factory level and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.You vacuum, and an hour later the shelves wear a fine grey film again — a clogged filter passes the finest dust straight back into the room, where it settles. With this Plutoos HEPA filter the dust stays in the machine: ≥99.5% of particles from 0.3 µm are held in the filter layers. One-minute swap, washable in cold water, clearly cheaper than the original — and tested for seat and filtration before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Grundig VCH9629 · VCH9630 · VCH9631✓ Grundig VCH9632 · VCH9832 · VCH9829⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11676 fit all the models listed?Yes — it is a drop-in fit for Grundig VCH9629, VCH9630, VCH9631, VCH9632 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for AEG LX7 LX8 LX9 – washable & reusable
HEPA Filter for AEG LX7 / LX8 / LX9 — quiet the strain, clear the airFits AEG LX7 · LX8 · LX9 · VX6–VX9 · AFS1W · AEF12 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for AEG LX7, LX8 and LX9: the Plutoos PL11734 replaces the tired filter that has been quietly throttling your AEG. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.When the AEG starts sounding strained and leaves lint along the skirting boards, it is fighting for air through a saturated filter. This Plutoos HEPA filter opens the airway again: factory suction, and ≥99.5% of fine particles from 0.3 µm held in the filter layers instead of returning to the room. Fits LX7 to LX9 and VX6 to VX9 drop-in, washable in cold water — and clearly cheaper than the original part. 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ AEG LX7 · LX8 · LX9✓ AEG VX6 · VX7 · VX8✓ AEG VX9 · AFS1W · AEF12⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11734 fit all the models listed?Yes — it is a drop-in fit for AEG LX7, LX8, LX9, VX6 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × Pre-Filters for AEG CX7-2 QX8 Ergorapido Cordless Vacuum – washable
4 × Pre-Filter for AEG CX7-2 / QX8 Ergorapido — quick swaps for the daily helperFits AEG CX7-2 · QX8 Ergorapido — washable in cold water, 4 per pack✓ Drop-in fit like the original🧼 Washable — cold water💰 Clearly cheaper than the original part🇨🇭 Swiss stockThe Plutoos PL11815 is a precision-fit pre-filter for the AEG CX7-2 and QX8 Ergorapido — and a genuine drop-in part: used filter out, new one in, without tools or modification. Washable under cold water, checked for fit and function before dispatch, and clearly cheaper than the original manufacturer part.The stick vac that handles the daily crumbs fills its pre-filter faster than any big vacuum — and a packed pre-filter is the moment the quick once-over stops being quick. With four Plutoos pre-filters on the shelf you simply swap and go: drop-in fit for the CX7-2 and QX8 Ergorapido, one order covering a long stretch of changes. Wash the used one cold, dry it fully, and rotate it back in. 60-day return unopened — and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypePre-filterWashableYes — cold waterPack count4 per packCompatible vacuum models✓ AEG CX7-2 · QX8 Ergorapido⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementCleaning the pre-filterTap the pre-filter out or rinse it under cold running water — no soap, no brush. Monthly is a good rhythm in regular use.Drying before refittingLet it air-dry completely — at least 24 hours, better 48 — before it goes back in. A damp filter can damage the motor.When to replaceReplacement is recommended every 6 months — or when the filter stays grey after washing or suction keeps fading; depending on use that is every 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11815 fit all the models listed?Yes — it is a drop-in fit for AEG CX7-2, QX8 Ergorapido. No tools, no modification needed.How often should the pre-filter be changed?Replacement is recommended every 6 months — or, with regular washing, when the filter stays grey after rinsing or suction keeps fading; depending on use every 6–12 months.Can the pre-filter be washed?Yes — tap it out or rinse it under cold water, without soap or a brush, and let it dry completely before refitting; a damp filter can damage the motor.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Rowenta Compact Power Cyclonic Force – washable & reusable
3 × HEPA Filter for Rowenta Compact Power Cyclonic — compact vac, full breathFits Rowenta Compact Power Cyclonic · Rowenta Force — washable, HEPA class, three changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Rowenta's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11733 is the direct replacement for Rowenta Compact Power Cyclonic and Force: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A vacuum that lives in the hallway cupboard of a small flat has no room for weak days — yet the Rowenta's filter quietly fills with every quick round of crumbs and dust. This 3-pack keeps it simple: fresh Plutoos filter in, factory suction back, and at the recommended rhythm one order covers roughly a year. Washable in cold water without detergent, drop-in fit without tools, tested for seat and filtration before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Rowenta Compact Power Cyclonic · Force⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11733 fit all the models listed?Yes — it is a drop-in fit for Rowenta Compact Power Cyclonic, Force. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × HEPA Filters for Roborock S8 MaxV Ultra S8 Max S8 Ultra Robot Vacuum – washable
4 × HEPA Filter for Roborock S8 — daily runs, clean exhaustFits Roborock S8 MaxV Ultra · S8 Max · S8 Ultra — washable, HEPA class, year+ supply✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockEvery Roborock is only as good as its filter. The Plutoos PL11766 is the drop-in replacement for Roborock S8 MaxV Ultra, S8 Max and S8 Ultra — and because filters are wear parts that clog with fine dust, pollen and pet hair, a change every three to six months keeps suction at factory level and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.A robot vacuums far more often than you would by hand — and its exhaust blows at floor level, exactly where children play and pets lie. So the filter matters double: this Plutoos 4-pack keeps the S8's exhaust clean run after run, holding fine dust and pollen from 0.3 µm in the HEPA layers. Changed at the recommended rhythm, four filters comfortably cover a year and more — one order for a whole season of daily cleaning. Drop-in fit, washable, tested before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count4 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Roborock S8 MaxV Ultra · S8 Max · S8 Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11766 fit all the models listed?Yes — it is a drop-in fit for Roborock S8 MaxV Ultra, S8 Max, S8 Ultra. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Philips PowerPro Compact PowerPro City – washable & reusable
2 × HEPA Filter for Philips PowerPro — power back in the PowerProFits Philips PowerPro Compact · PowerPro City · PowerPro Active — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Philips's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11715 is the direct replacement for Philips PowerPro Compact, PowerPro City and PowerPro Active: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.The PowerPro's container is empty, yet the suction feels tired — the real blockage sits in the filter, saturated with months of fine dust. Swap in a fresh Plutoos filter and the airflow comes back; the HEPA layers keep ≥99.5% of particles from 0.3 µm out of your room air. Two filters in the pack mean a full change now and the next one already in the drawer — or the wash-and-rotate routine. No tools, drop-in fit, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Philips PowerPro Compact · PowerPro City · PowerPro Active⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11715 fit all the models listed?Yes — it is a drop-in fit for Philips PowerPro Compact, PowerPro City, PowerPro Active. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland