Vacuum cleaner batteries, filters, bags and universal accessories - suitable for brands such as Dyson, Roborock and Kärcher. At Plutoos.ch you get durable spare parts with free shipping and fast delivery.
Plutoos HEPA Filter for Dyson V7 V8 Absolute V8 Animal – washable & reusable
HEPA Filter for Dyson V7 / V8 Absolute / V8 Animal — breathe easy while you vacuumFits Dyson V8 · V8 Absolute · V8 Animal · V7 · V7 Absolute · V7 Motorhead — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Dyson V8, V8 Absolute and V8 Animal: the Plutoos PL11686 replaces the tired filter that has been quietly throttling your Dyson. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.You empty the bin, and the V8 still pulls like it is half asleep — because the bottleneck is not the bin, it is the saturated filter behind it. This Plutoos filter clears the airway: factory suction returns, and the HEPA-class layers hold pollen, dust-mite allergens and fine dust from 0.3 µm. Drop-in fit without tools, washable in cold water without detergent, and tested for seat and filtration before it leaves the warehouse.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V8 · V8 Absolute · V8 Animal✓ Dyson V7 · V7 Absolute · V7 Motorhead⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11686 fit all the models listed?Yes — it is a drop-in fit for Dyson V8, V8 Absolute, V8 Animal, V7 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Dyson V11 V15 SV14 SV17 SV22 – washable & reusable
3 × HEPA Filter for Dyson V11 / SV17 / V15 — suction like on day oneFits Dyson V11 · SV17 · V15 · SV14 · SV22 — washable, HEPA class, three changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11673 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V11, SV17 and V15 at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.If vacuuming makes you sneeze, the machine is usually blowing back what it should be keeping: a saturated filter lets fine dust straight through the exhaust. With a fresh Plutoos filter the V11 pulls like it did out of the box — and the air behind it stays clean. At the recommended 3–6-month rhythm this 3-pack covers around a year of changes, often more, in one order instead of three. Each filter is tested for seat and filtration before dispatch, and if anything is unclear our Swiss team is one email away.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V11 · SV17 · V15✓ Dyson SV14 · SV22⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11673 fit all the models listed?Yes — it is a drop-in fit for Dyson V11, SV17, V15, SV14 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 3 × HEPA Filters for Dyson V12 Detect Slim Absolute – washable & reusable
3 × HEPA Filter for Dyson V12 Detect Slim — suction like on day oneFits Dyson V12 · V12 Detect Slim · Absolute · Total Clean — washable, HEPA class, a year of changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11678 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V12, V12 Detect Slim and Absolute at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A V12 that whistles at full boost and still leaves grit at the carpet edge is not getting weaker — it is suffocating behind a saturated filter. Give it a fresh Plutoos filter and the airflow, and the pickup, come back at once. At the recommended 3–6-month rhythm this 3-pack means around a year of changes from a single order, and every filter is washable in cold water to stretch its life further. Tested for seat and filtration before dispatch; 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count3 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V12 · V12 Detect Slim · Absolute · Total Clean⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11678 fit all the models listed?Yes — it is a drop-in fit for Dyson V12, V12 Detect Slim, Absolute, Total Clean. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Floor Stand Black for Dyson V15 V12 V11
Plutoos Floor Stand for Dyson — black, freestanding, no drillingFor Dyson V15 V12 V11 · docking place plus 4 accessory hooks✓ No drilling, no wall damage🧹 Vacuum docked and always ready🇨🇭 Swiss stockThis freestanding metal stand gives your Dyson V15, V12 or V11 a fixed home without a single hole in the wall: a stable base plate and a two-part column hold the vacuum docked and ready to grab, and four hooks keep floor heads and nozzles in one place. Screws and the assembly tool are included — set-up takes minutes, and because the wall stays untouched it is ideal for rented flats.The original wall dock assumes you are allowed — and willing — to drill into your wall. With this stand the vacuum parks upright in the hallway or utility room instead of leaning in a corner, and the accessories stop migrating through the household. In black, it stays discreet next to dark furniture and appliances. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Floor stand, blackTwo-part metal column with stable base plate and 4 accessory hooksScrews + assembly toolEverything needed for set-up — no drilling, no wall plugsCompatible vacuum models✓ Dyson V15 (all variants)✓ Dyson V12 (all variants)✓ Dyson V11 (all variants)Assembly in 4 stepsScrew the two column sections together with the included screws.Mount the column upright on the base plate.Hang the four accessory hooks and your attachments in place.Dock the vacuum into the holder — ready.Frequently asked questionsDo I have to fix the stand to the wall or floor?No — the weighted base plate keeps it freestanding and stable on any flat floor; walls stay untouched.Can the vacuum charge while it is docked?Yes — route your original Dyson charging cable to the stand and plug it in as usual, so the vacuum is charged right where it parks.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Turbine Floor Head with Carbon Fibre Roller and LED for Dyson V7 V8 V10 V11 V15 – for carpets and hard floors
Plutoos Electric Turbine Floor Head with Carbon Fibre Roller and LEDCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🧶 Carbon fibre bristles reach deep carpet dirt🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThis direct-drive turbine head carries a roller with stiff carbon fibre bristles: on carpets they agitate deep-seated dirt that airflow alone leaves behind, and on hard floors, tiles and marble the same roller sweeps fine dust reliably into the suction channel. Small LED lights at the front show the way under furniture, the joint swivels 90 degrees for tight corners, and the head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.If your home has rugs and runners, a soft roller alone only flatters them — this is the carpet specialist. The carbon fibre bristles comb the pile instead of gliding over it, which makes this head the ideal second head next to a soft roller for hard floors. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Turbine floor head with carbon fibre rollerDirect-drive roller with LED front lights, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Not compatible with Dyson V6, V12, Slim series and DC models — these use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Carpet specialist: the carbon fibre bristle roller is at its best on carpets and short pile — and also works on hard floors, tiles and marble.Swivels 90 degrees: the flexible joint steers around chair legs and reaches under furniture, with the LED lights showing the way.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the LED lights switch on automatically.Carpets and hard floorsOn carpets, use a higher suction level and guide the head slowly so the bristles can comb the pile. On hard floors a medium level is enough — the roller sweeps fine dust into the suction channel by itself.Care & maintenanceCleaning the rollerRemove hair and threads from the roller regularly; wrapped hair can be cut carefully along the roller with scissors and pulled away.Clearing the suction channelIf pick-up drops, check the opening behind the roller for blockages and remove any debris.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on deep carpetNormal on very deep pile — reduce the suction level so the roller can keep turning.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is it suitable for parquet?Yes, the head also works on hard floors. If your home is exclusively delicate parquet, a soft roller head is the gentler everyday choice — this head is the one for homes with carpets too.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × HEPA Filters for Dyson V10 SV12 Animal Absolute Motorhead – washable & reusable
4 × HEPA Filter for Dyson V10 — a year of clean suction in one boxFits Dyson V10 · Animal · Absolute · Motorhead · Cyclone · Total Clean · SV12 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11725 is a high-quality replacement filter for your Dyson vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dyson V10, V10 Animal and V10 Absolute at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A V10 that vacuums daily eats through filters — and the day the filter indicator triggers is never the day you have a spare at home. This 4-pack fixes that for a long time: at the recommended 3–6-month rhythm you are set for a year and comfortably beyond, one order, no repeat shipping. Every filter is washable in cold water, holds ≥99.5% of particles from 0.3 µm, and clicks in without tools. Tested for seat and filtration before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count4 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V10 · V10 Animal · V10 Absolute✓ Dyson V10 Motorhead · V10 Cyclone · V10 Total Clean · SV12⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11725 fit all the models listed?Yes — it is a drop-in fit for Dyson V10, V10 Animal, V10 Absolute, V10 Motorhead and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 15 × Fleece Dust Bags for Kärcher WD4 WD5 WD6 MV4 MV5 MV6 Premium – replaces 2.863-006.0
15 × Fleece Dust Bags for Kärcher WD4–WD6 / MV4–MV6 — wet & dry, extremely tear-resistantReplaces 2.863-006.0 / KFI 487 — 5-layer fleece for wet & dry vacuuming, also fits KWD, KNT 4, SW 5.100, SE 6.100✓ Drop-in fit like the original🧵 5-layer fleece — extremely tear-resistant💧 Wet & dry vacuuming📦 15-bag supply pack🇨🇭 Swiss stockRenovation dust, the workshop, the garage — exactly where a Kärcher WD4, WD5 or WD6 earns its keep, a simple bag reaches its limit fast. The Plutoos fleece bag replaces the Kärcher original 2.863-006.0 (KFI 487): 5-layer non-woven fleece, extremely tear-resistant, with high fine-dust retention — and suitable for wet and dry vacuuming alike, so liquids never force a bag change.The recommended change is every 2–3 months — with fifteen bags per pack that is a supply for years. The change is drop-in and tool-free, and the fleece keeps the dust sealed in the bag for hygienic disposal. Every bag is checked for fit and layer count before dispatch; unopened items can be returned for 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueType5-layer fleece dust bagOEM reference2.863-006.0 (KFI 487)UseSuitable for wet & dry vacuumingRecommended changeEvery 2–3 monthsPack count15 per packCompatible vacuum models✓ Kärcher WD4✓ Kärcher WD4 Premium✓ Kärcher WD5✓ Kärcher WD5 P✓ Kärcher WD5 Premium✓ Kärcher WD5 P Premium✓ Kärcher WD6✓ Kärcher WD6 Premium✓ Kärcher WD6 P Premium✓ Kärcher MV4✓ Kärcher MV4 Premium✓ Kärcher MV5✓ Kärcher MV5 P✓ Kärcher MV5 Premium✓ Kärcher MV5 P Premium✓ Kärcher MV6✓ Kärcher MV6 P Premium✓ Kärcher KWD 4✓ Kärcher KWD 5✓ Kärcher KWD 6✓ Kärcher KNT 4✓ Kärcher SW 5.100✓ Kärcher SE 6.100⚠️ Also fits the series WD4.000 to WD5.999. Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the vacuum off.Open the bag compartment and lift the full bag out — the fleece keeps the contents sealed as you remove it.Insert the Plutoos bag until it sits firmly on the holder.Close the compartment — done. A direct replacement, no tools or modification needed.Care & replacementChange every 2–3 monthsThe recommended change is every 2–3 months — earlier as soon as suction fades or the bag is full. A full bag throttles performance and strains the motor.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead.DisposalDispose of the full bag closed in the household waste — the fleece keeps the fine dust sealed inside, no dust cloud over the bin.TroubleshootingSymptomSolutionSuction still weak right after the bag changeTake the bag out and refit it until it sits firmly on the holder — a bag that is not fully seated lets air slip past it.Bag bursts with extremely fine construction dust (plaster)Feedback from the community: very fine plaster and construction dust can clog the bag abruptly and make it burst — reduce the suction power and change the bag earlier.Dusty smell while vacuumingThe bag is saturated — fit a fresh bag and check the vacuum's filters as well.Frequently asked questionsDoes the Plutoos PL11731 fit my model?It is a compatible Plutoos replacement for the Kärcher original 2.863-006.0 (KFI 487) and fits drop-in on the listed WD4, WD5, WD6, MV4, MV5 and MV6 models (incl. Premium) as well as KWD 4/5/6, KNT 4, SW 5.100 and SE 6.100 — plus the series WD4.000 to WD5.999. Not sure? We check compatibility for you.Can I vacuum liquids with the fleece bag fitted?Yes — the 5-layer fleece is suitable for wet and dry vacuuming; the bag does not need to be removed for liquids.How often should the bag be changed?The recommended change is every 2–3 months — earlier as soon as suction fades. With the 15-pack you have a supply for years.Can a used bag be emptied and used again?No — dust bags are single-use. Emptying a used bag releases exactly the fine dust it exists to trap; always insert a fresh bag.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Floor Head with Soft Roller, 4 LED Front Lights and Suspended Wheels for Dyson V7 V8 V10 V11 V15 – for hard floors
Plutoos Electric Floor Head with Soft Roller, 4 LED Lights and Suspended WheelsCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original💡 4 LED lights reveal dust🛞 Suspension keeps the roller on the floor🇨🇭 Swiss stockThe full-length soft roller of this motorized floor head takes fine dust and larger crumbs off hard floors in one pass, while four white LED lights at the front reveal dust under furniture before you reach it. Its speciality is the suspension: the large external wheels are spring-mounted and keep the roller pressed evenly onto the floor — even where the surface is slightly uneven. A double swivel joint steers around furniture, and the head clicks onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment — powered by the vacuum, no battery, no setup.On smooth floors the difference is not how a head looks but whether the roller keeps full contact — lift-off at the edges is exactly where the dust lines remain. The sprung wheels do that pressing for you on every pass, which makes this the thorough choice among soft roller heads. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Soft roller floor headMotorized full-length soft roller (removable), 4 LED front lights, spring-suspended wheelsCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.The suspension does the pressing: spring-mounted wheels keep the roller in even contact with the floor, so pick-up stays constant across the full width.Removable roller: the soft roller comes out without tools for cleaning; let it dry completely before reinserting.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the LED lights switch on automatically.Where it shinesParquet, tiles, vinyl and stone: guide the head slowly, especially under furniture — the four LEDs show remaining dust in exactly the zones you cannot see from above.Care & maintenanceCleaning the rollerTake the soft roller out, remove hair and threads, and let it dry completely before reinserting. Do not machine-wash the roller.Keeping the lights brightWipe the LED front lights with a dry cloth from time to time — a dusty lens visibly weakens the light.TroubleshootingSymptomSolutionRoller or lights do not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on carpetNormal on deep carpets — this head is designed for hard floors. Reduce the suction level on rugs.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is it suitable for carpets?It is designed for hard floors and copes with flat rugs; for real carpets a bristle or turbine head is the better tool.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 6 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra auto-empty station – 5-layer fleece, incl. 4 mop cloths
6 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra — hands off the dustFits the X10+ · X20+ · L10s Ultra · L20 Ultra auto-empty station — 5-layer fleece, incl. 4 mop cloths✓ Drop-in fit like the original🧵 5-layer fleece — dust stays sealed📦 6-bag supply pack🇨🇭 Swiss stockYou bought a robot with an auto-empty station precisely so you would stop handling dust — a full station bag ends that comfort abruptly. The Plutoos PL11770 keeps your Xiaomi X10+ or X20+ and Dreame L10s Ultra or L20 Ultra emptying itself: 5-layer tear-resistant fleece holds fine dust, pollen and allergens sealed in the bag, hygienically closed the moment you lift it out.The pack is a small service kit in one order: 6 dust bags plus 4 mop cloths for the station, so bag change and mop refresh happen together. Under normal use one bag lasts about 4–6 weeks — around 6 months of auto-emptying — and each bag is a drop-in fit, no tools needed.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMulti-layer fleece dust bagFilter layers5-layerMaterialFleece (synthetic, tear-resistant)Pack count6 per packCompatible vacuum models✓ Xiaomi X10+✓ Xiaomi / Dreame X20+✓ Dreame L10s Ultra✓ Xiaomi / Dreame L20 Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11770 fit all the models listed?Yes — it is a drop-in fit for Xiaomi X10+, X20+, Dreame L10s Ultra and L20 Ultra. No tools, no modification needed.How many bags are in the pack and how long do they last?Under normal household use one bag lasts about 4–6 weeks. The 6-pack keeps the auto-empty station supplied for around 6 months from a single order.What exactly is in the pack?6 Plutoos dust bags plus 4 mop cloths for the station — the mop refresh comes along in the same order.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Mop Pads for Dreame X40 L40 L10s Ultra
Mop Pads for Dreame X40 / L40 / L10s Ultra — holder included, click in and mopFits Dreame X40 · L40 · L10s Ultra — microfibre, washable up to 60 °C, incl. mop pad holder✓ Drop-in fit like the original🧼 Washable up to 60 °C📦 Holder included💎 Outlasts standard pads🇨🇭 Swiss stockWhen a mop pad is worn — or its holder cracked from a bump too many — mopping quality drops long before the robot complains. The Plutoos PL11826 replaces both at once for your Dreame X40, L40 or L10s Ultra: a microfibre mop pad with the matching holder included, so the complete unit clicks back under the robot like the original. Drop-in fit, no tools, no modification.The pad is machine-washable up to 60 °C and goes back on its holder in seconds — hygienic mopping without buying a whole spare set from the manufacturer. Thanks to its premium microfibre it also keeps going significantly longer than the manufacturer's standard original pad, hard floors included. Checked for fit before dispatch, clearly cheaper than the original part, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMicrofibre mop padWashableYes — up to 60 °CDryingAir-drying recommendedPack count1 per packIncludedMop pad holderCompatible robot vacuum models✓ Dreame X40✓ Dreame L40✓ Dreame L10s Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad or the complete holder off the robot.Press the Plutoos pad onto the holder and click the holder back under the robot.Moisten the pad briefly before first use — better mopping from the first pass.Done — it is a direct replacement, no tools needed.Care & replacementWashing the padRinse the pad under warm water after mopping and let it air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable it takes up to 60 °C.The holderWipe the holder clean when you wash the pad and check the velcro surface — a clean, intact holder keeps the pad flat on the floor.When to replaceReplace the pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and let it dry fully before the next run. Also refill the water tank before long runs.Pad comes loose during moppingPress the pad evenly onto the whole velcro surface of the holder and check the holder is clicked in properly.Frequently asked questionsDoes the Plutoos PL11826 fit all the models listed?Yes — it is a drop-in fit for Dreame X40, L40 and L10s Ultra. No tools, no modification needed.Is the holder really included?Yes — the delivery includes the mop pad with its holder, so you can replace the complete unit, not just the cloth.How often does the mop pad need changing?The pad can be machine-washed after every run at up to 60 °C. Replace it after 100-150 washes or once the material loses its absorbency.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Electric Floor Head with Green LED Light for Dyson V7 V8 V10 V11 V15 – makes fine dust visible
Plutoos Electric Floor Head with Green LED Light — makes fine dust visibleCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original💡 Green light makes dust visible🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThe green LED light of this motorized floor head skims flat across the floor and makes fine dust, hair and crumbs visible that stay invisible under normal room light — you see exactly where it is still dirty and where you are already done. The head clicks directly onto the suction pipe of your Dyson V7, V8, V10, V11 or V15 like the original attachment and is driven by the vacuum itself: no separate battery, no charging, no setup.You know the moment: the floor looks clean — until the evening sun hits it sideways and suddenly every speck shows. That is exactly the effect this head creates on demand, on every pass. A comparable original attachment with dust illumination is only available on the newest, most expensive Dyson models; here you retrofit the same aha-effect onto your existing vacuum for a fraction of the price. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Electric floor head with green LED lightMotorized roller, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Not compatible with Dyson V6, V12, Slim series and DC models — these use a different connector.Good to knowWorks like the original: the head clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Green light instead of laser: the flat-angled green LED creates the same "dust becomes visible" effect known from the newest Dyson heads.Soft hybrid roller: suitable for hard floors and low-pile carpets; the roller can be removed for cleaning without tools.Installation & useAttaching the headRemove the current floor head by pressing its red release button.Push this head onto the suction pipe until it clicks audibly.Start the vacuum — the roller and the green light switch on automatically.Getting the best light effectThe dust effect is strongest in dim rooms and at a flat viewing angle. Guide the head slowly away from you — the light band in front of the roller shows remaining dust before the roller reaches it.Care & maintenanceCleaning the rollerUnlock the roller cap on the side (coin or slotted screwdriver), pull the roller out, remove hair and threads, and let it dry completely before reinserting. Do not machine-wash the roller.Keeping the light brightWipe the LED strip with a dry cloth from time to time — a dusty lens visibly weakens the light band.TroubleshootingSymptomSolutionRoller or light does not startDetach the head and click it on again firmly — the electrical contacts must sit fully. Check the connector for dust.Roller stops on carpetNormal on deep carpets — this head is designed for hard floors and low-pile carpets. Reduce the suction level.Rattling noiseRemove the roller and clear hair or debris from the bearing points.Frequently asked questionsDoes my vacuum recognize the head automatically?Yes. The head uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Is this a laser like on the Dyson V15?It is a green LED positioned at a flat angle — the visual effect is the same principle: fine dust lights up before the roller. It is not a laser diode.Does using this head affect my Dyson warranty?No. The head is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × Pre-Filters for Dyson DC33 DC37 DC39 – washable & reusable
2 × Pre-Filter for Dyson DC33 / DC37 / DC39 — fresh pull, drop-in fitFits Dyson DC33 · DC37 · DC39 — washable in cold water, 2 per pack✓ Drop-in fit like the original🧼 Washable — cold water💰 Clearly cheaper than the original part🇨🇭 Swiss stockThe Plutoos PL11724 is a precision-fit pre-filter for Dyson DC33, DC37 and DC39 — a genuine drop-in part: pull out the used filter, fit the new one, no tools, no modification. It is washable under cold water, every part is checked for fit and function before dispatch, and it costs clearly less than the original manufacturer part.When tapping out the pre-filter no longer helps, it is simply full — months of dust have packed it, and the DC's pull fades earlier every session. A fresh Plutoos pre-filter restores the old pull: exact drop-in fit for DC33, DC37 and DC39, and with two in the pack the next change is already on the shelf. Rinse the used one cold, let it dry fully, and it serves as your rotation spare. 60-day return on unopened items — and our Swiss team is one email away.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypePre-filterWashableYes — cold waterPack count2 per packCompatible vacuum models✓ Dyson DC33 · DC37 · DC39⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementCleaning the pre-filterTap the pre-filter out or rinse it under cold running water — no soap, no brush. Monthly is a good rhythm in regular use.Drying before refittingLet it air-dry completely — at least 24 hours, better 48 — before it goes back in. A damp filter can damage the motor.When to replaceReplacement is recommended every 6 months — or when the filter stays grey after washing or suction keeps fading; depending on use that is every 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11724 fit all the models listed?Yes — it is a drop-in fit for Dyson DC33, DC37, DC39. No tools, no modification needed.How often should the pre-filter be changed?Replacement is recommended every 6 months — or, with regular washing, when the filter stays grey after rinsing or suction keeps fading; depending on use every 6–12 months.Can the pre-filter be washed?Yes — tap it out or rinse it under cold water, without soap or a brush, and let it dry completely before refitting; a damp filter can damage the motor.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Miele Complete C3 Powerline S8340 – washable & reusable
2 × HEPA Filter for Miele Complete C3 Powerline — the 'just vacuumed' feeling, in the air tooFits Miele Complete C3 Powerline · S8340 — washable, HEPA class, two changes in one order✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockEvery Miele is only as good as its filter. The Plutoos PL11711 is the drop-in replacement for Miele Complete C3 Powerline and S8340 — and because filters are wear parts that clog with fine dust, pollen and pet hair, a change every three to six months keeps suction at factory level and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.The living room looks vacuumed — but the air feels dusty, and sunlight through the window shows it dancing. That is a saturated filter passing fine dust back out of your Miele. With a fresh Plutoos HEPA filter the exhaust runs clean again: pollen, dust-mite allergens and fine dust from 0.3 µm stay in the filter layers. The 2-pack sets you up for two change cycles — or one filter in use while the washed one dries. Drop-in fit, no tools, and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Miele Complete C3 Powerline · S8340⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11711 fit all the models listed?Yes — it is a drop-in fit for Miele Complete C3 Powerline, S8340. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 15 × Paper Dust Bags for Kärcher WD2 WD3 SE 4001 SE 4002 – replaces 6.959-130
15 × Paper Dust Bags for Kärcher WD2 / WD3 / SE 4001 / SE 4002 — the budget-smart supplyFits Kärcher WD2 · WD3 · MV2 · MV3 · SE 4001 · SE 4002 — 2-layer paper with cardboard collar, 25 l, replaces 6.959-130✓ Drop-in fit like the original📄 2-layer paper with cardboard collar🌱 Compostable kraft paper🇨🇭 Swiss stockHousehold dust, the workshop corner, the cellar floor — for classic dry vacuuming a Kärcher does not need an expensive specialty bag, it needs one that fits properly. The Plutoos paper bag replaces the Kärcher original 6.959-130 (KFI 487): 2-layer paper with a sturdy cardboard collar and a 25 l volume that keeps dust and coarse dirt securely in the bag — in the WD2 and WD3 just as in the MV2, MV3, SE 4001, SE 4002 and the older A and WD types.Paper is also the eco-friendly choice here: the kraft paper is biodegradable and recyclable — the full bag simply goes closed into the household waste. That matches the Plutoos principle of shipping in reused, eco-friendly packaging. The recommended change is every 2–3 months (depending on use), which makes the 15-pack a supply for years. Every bag is checked for fit before dispatch; unopened items can be returned for 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueType2-layer paper dust bagOEM reference6.959-130 (KFI 487)Volume25 lUseDry vacuumingRecommended changeEvery 2–3 monthsPack count15 per packCompatible vacuum models✓ Kärcher WD2✓ Kärcher WD2 Plus✓ Kärcher WD3✓ Kärcher WD3 Battery✓ Kärcher MV2✓ Kärcher MV3✓ Kärcher SE 4001✓ Kärcher SE 4002✓ Kärcher A 2204✓ Kärcher A 2534✓ Kärcher WD 3200✓ Kärcher WD 3500 P⚠️ Also fits the series WD 3.200 to WD 3.800 M. Paper bags are made for dry vacuuming — for liquid pickup simply remove the bag; the vacuum picks up liquids without one. Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the vacuum off.Open the bag compartment and lift the full bag out for closed disposal.Fit the Plutoos paper bag with its cardboard collar firmly onto the intake fitting.Close the compartment — done. A direct replacement, no tools or modification needed.Care & replacementWhen to changeChange the bag as soon as suction fades noticeably or the bag is full — a full bag makes the motor work harder with every pass. The recommended change is every 2–3 months, sooner under heavy use.Dry use onlyPaper bags do not take liquids — remove the bag before wet vacuuming; the vacuum picks up liquids straight into the container. Fit a fresh bag afterwards for dry work.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead.DisposalDispose of the full bag closed in the household waste — the compostable kraft paper is biodegradable, and the dust stays in the bag, no dust cloud over the bin.TroubleshootingSymptomSolutionSuction still weak right after the bag changeTake the bag out and refit it until the cardboard collar sits flat on the intake fitting — a bag that is not fully seated lets air slip past it.Bag tears or gets dampPaper bags are for dry dirt only — remove the bag before picking up liquids; the vacuum takes them straight into the container.Dusty smell while vacuumingThe bag is saturated — fit a fresh bag and check the vacuum's filters as well.Fresh bag punctured by coarse construction debrisCommunity tip: coarse debris with sharp edges can puncture a brand-new bag. Vacuum normal dust first until the bag is about 15–20% full — the dust cushion protects the paper — then pick up the coarse debris.Frequently asked questionsDoes the Plutoos PL11717 fit all the models listed?Yes — it replaces the Kärcher original 6.959-130 (KFI 487) and fits drop-in on Kärcher WD2, WD2 Plus, WD3, WD3 Battery, MV2, MV3, SE 4001, SE 4002, A 2204, A 2534, WD 3200 and WD 3500 P — plus the series WD 3.200 to WD 3.800 M. No tools, no modification needed.Can I vacuum liquids with the paper bag fitted?No — paper is not made for liquid pickup. Remove the bag first: the vacuum picks up liquids straight into the container. Fit a fresh bag afterwards for dry work.Paper or fleece — which is right for me?For classic dry vacuuming in the household and workshop, paper is the budget-smart choice. If you regularly pick up liquids or very fine construction dust, our range also includes a tear-resistant fleece line.How many bags are in the pack and how long do they last?The pack contains 15 bags. The recommended change is every 2–3 months, sooner under heavy use — so the 15-pack covers you for years.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Trigger Lock Clip for Dyson V15 V11 V10 (Detect / Absolute / Animal)
Plutoos Trigger Lock Clip for Dyson V15 V11 V10For Dyson V15 V11 V10 with power trigger · clips on in seconds, no tools✓ No more holding the trigger🖐️ Relieves hand and fingers🇨🇭 Swiss stockThis small red clip slides over the handle of your Dyson V15, V11 or V10 and holds the power trigger pressed — the vacuum runs continuously until you pull the clip off again. It attaches and removes in seconds, needs no tools and leaves no residue or marks on the handle.Holding the trigger through an entire flat is the most common Dyson complaint — and this is the twelve-franc fix. On long sessions, for smaller hands or aching joints, vacuuming becomes noticeably more relaxed the moment the finger can simply rest. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Trigger lock clipRed clip that holds the power trigger pressed — attaches without toolsCompatible vacuum models✓ Dyson V15 Detect✓ Dyson V15 Absolute✓ Dyson V15 Animal✓ Dyson V11 (all variants)✓ Dyson V10 (all variants)⚠️ Designed for Dyson V15, V11 and V10 models with a power trigger — models with a start button do not need a trigger lock.Fitting the clip in 3 stepsSlide the clip over the handle, above the power trigger.Press it down until the trigger is held fully — the vacuum keeps running.To stop, simply pull the clip off — the trigger releases immediately.Frequently asked questionsWill the clip damage the handle?No — it clips on and off without tools and leaves no residue or marks on the handle.Does the vacuum behave normally with the clip on?Yes. The clip only holds the trigger mechanically — battery display, suction levels and automatic shut-off work exactly as usual.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos HEPA Filter for Dyson V7 V8 Animal – washable & reusable
HEPA Filter for Dyson V7 / V8 Animal — clean exhaust air againFits Dyson V7 · V8 · V8 Animal · V8 Absolute · V8 Motorhead — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockFine dust, pollen, pet hair — your Dyson's filter collects all of it, and slowly clogs doing so, because filters are wear parts. The Plutoos PL11683 is the direct replacement for Dyson V7, V8 and V8 Animal: changed every three to six months, it keeps the machine at factory suction and the exhaust air clean. The filter reaches HEPA class (≥99.5% at 0.3 µm): pollen, dust-mite allergens, pet hair and fine dust are held in the multi-layer microfibre and glass-fibre weave instead of returning to the room air. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.In a household with pets, the V8's filter works overtime: hair and fine dust pack the layers, and at some point your eyes itch every time you vacuum. This Plutoos HEPA filter takes the exhaust air back to clean — pet hair and fine dust stay in the filter instead of drifting through the flat. Swap it in under a minute without tools, rinse it monthly in cold water, and pay clearly less than for the original part.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count1 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson V7 · V8 · V8 Animal✓ Dyson V8 Absolute · V8 Motorhead⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11683 fit all the models listed?Yes — it is a drop-in fit for Dyson V7, V8, V8 Animal, V8 Absolute and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Is this an original part or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price: compatible is clearly cheaper than original.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Mini Electric Brush for Dyson V7 V8 V10 V11 V15 – for upholstery, mattresses and pet hair
Plutoos Mini Electric Brush — for upholstery, mattresses and pet hairCompatible with Dyson V7 V8 V10 V11 V15 · click-on, no tools✓ Clicks on like the original🐾 Motor-driven roller pulls hair out of fabric🔌 Powered by the vacuum — no battery🇨🇭 Swiss stockThis mini electric brush is a motorized turbo head for your Dyson V7, V8, V10, V11 or V15: a motor-driven bristle roller works pet hair, dust and fibres out of upholstery, mattresses, car seats and stairs instead of just sucking over them. It clicks directly onto the handheld unit or onto the suction pipe like the original attachment and is powered by the vacuum itself — no separate battery, no charging, no setup.Anyone with a cat or dog knows the stubborn film of hair a plain nozzle leaves behind on the sofa. The rotating roller reaches into the fabric and lifts out what airflow alone cannot move — the first pass over the mattress is usually the moment of conversion. Fits by click, warranty of your vacuum untouched, 60-day return unopened — your risk: none.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Mini electric brushMotor-driven bristle roller, powered via the vacuum's connectorCompatible vacuum models✓ Dyson V7 / SV11 (all variants)✓ Dyson V8 / SV10 (all variants)✓ Dyson V10 (all variants)✓ Dyson V11 (all variants)✓ Dyson V15 (all variants)⚠️ Please check the model list before ordering — Dyson V6, V12 and Slim models use a different connector.Good to knowWorks like the original: the brush clicks onto the quick-release connector and is powered and controlled by the vacuum — attach and start.Handheld or pipe: attach it directly to the handheld unit for sofa, mattress and car — or to the pipe for stairs without bending down.Made for fabric: designed for upholstery, mattresses and textiles; for large floor areas a floor head remains the better tool.Installation & useAttaching the brushRemove the current attachment by pressing its red release button.Click the mini brush onto the handheld unit or the suction pipe until it clicks audibly.Start the vacuum — the bristle roller starts automatically.Best results on fabricGuide the brush slowly in overlapping passes and once against the pile direction — that is when the roller lifts embedded hair. On loose covers, reduce the suction level so the fabric is not pulled in.Care & maintenanceCleaning the rollerRemove wrapped hair and threads from the roller regularly; long hair can be cut carefully along the roller with scissors and pulled away.Keeping the contacts cleanWipe the connector dry from time to time — clean contacts keep the roller starting reliably.TroubleshootingSymptomSolutionRoller does not turnDetach the brush and click it on again firmly — the electrical contacts must sit fully. Remove wrapped hair that may block the roller.Brush sticks to the fabricReduce the suction level — especially on loose covers and soft upholstery.Rattling noiseRemove the roller debris: clear hair and threads from the bearing points at the roller ends.Frequently asked questionsDoes my vacuum recognize the brush automatically?Yes. The brush uses the same connector and power supply as the original attachments — click it on and vacuum, no setup needed.Can I use it on my mattress?Yes — that is exactly its job: the motor-driven roller works dust and hair out of the mattress surface instead of just gliding over it.Does using this brush affect my Dyson warranty?No. The brush is attached without tools or modification and can be removed at any time.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × HEPA Filters for Dreame L10s Ultra L10 Ultra L10s Pro Robot Vacuum – washable
4 × HEPA Filter for Dreame L10s — set for a year of daily cleaningFits Dreame L10s Ultra · L10 Ultra · L10s Pro · D10 Plus — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11767 is a high-quality replacement filter for your Dreame vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Dreame L10s Ultra, L10 Ultra and L10s Pro at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.A robot vacuum cleans while nobody is watching — and nobody notices its filter silting up until the floors stop feeling properly clean. Four fresh Plutoos filters keep the Dreame at factory suction with clean exhaust: fine dust and pollen from 0.3 µm stay in the HEPA layers, not in the room. At the recommended rhythm, the 4-pack covers a year and comfortably more of daily runs in one order. Washable, drop-in fit, tested before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count4 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dreame L10s Ultra · L10 Ultra · L10s Pro · D10 Plus⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11767 fit all the models listed?Yes — it is a drop-in fit for Dreame L10s Ultra, L10 Ultra, L10s Pro, D10 Plus. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Dyson DC30 DC31 DC34 – washable & reusable
2 × HEPA Filter for Dyson DC30 / DC31 / DC34 — small vac, clean airFits Dyson DC30 · DC31 · DC34 · DC35 · DC44 · DC45 · DC56 · DC57 — washable, HEPA class✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Dyson DC30, DC31 and DC34: the Plutoos PL11727 replaces the tired filter that has been quietly throttling your Dyson. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.Car seats, sofa corners, stairs — the compact Dyson works in the tightest spots, with your nose right beside the exhaust. All the more reason for a fresh filter: this Plutoos 2-pack keeps the little machine at factory suction and holds fine dust from 0.3 µm in the filter rather than in the car. One filter in use, the washed one drying — the rotation never leaves you without. Drop-in fit, no tools, tested before dispatch.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Dyson DC30 · DC31 · DC34✓ Dyson DC35 · DC44 · DC45✓ Dyson DC56 · DC57⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11727 fit all the models listed?Yes — it is a drop-in fit for Dyson DC30, DC31, DC34, DC35 and more. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Kärcher WD4 WD5 WD6 Wet/Dry Vacuum – washable
2 × HEPA Filter for Kärcher WD4 / WD5 / WD6 — bring back the big pullFits Kärcher WD4 · WD5 · WD6 — washable, HEPA class, spare included✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockThe Plutoos PL11732 is a high-quality replacement filter for your Kärcher vacuum. Filters are wear parts — over time they clog with fine dust, pollen and pet hair, and both suction and air quality drop noticeably. A regular change every three to six months keeps your Kärcher WD4, WD5 and WD6 at factory suction, with clean exhaust air coming out the back. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. It is washable in cold water without detergent, and every filter is tested for exact seat and filtration efficiency before dispatch — the drop-in shape means you swap without tools or modification.Sawdust in the garage, gravel from the car boot, the aftermath of every small disaster in the basement — the Kärcher swallows it all until its filter silts up and the hose barely whispers. Swap in a fresh Plutoos filter and it pulls properly again; wash the used one in cold water and it returns to duty. Two in the pack: one working, one in reserve. Drop-in fit for WD4, WD5 and WD6 — no tools, and clearly cheaper than the original part.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Kärcher WD4 · WD5 · WD6⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11732 fit all the models listed?Yes — it is a drop-in fit for Kärcher WD4, WD5, WD6. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 10 × Dust Bags for Dreame X40 X50 L10s auto-empty station – 5-layer fleece
10 × Dust Bags for Dreame X40 / X50 / L10s — the routine stays automaticFits the Dreame X40 · X50 · L10s auto-empty station — 5-layer fleece, around 10 months of supply✓ Drop-in fit like the original🧵 5-layer fleece — dust stays sealed📦 10-bag supply pack🇨🇭 Swiss stockA Dreame X40 or X50 is at its best when you barely think about it — it cleans on schedule, empties itself, done. The weak point is a full station bag: auto-emptying stops and the robot's own dustbin fills instead. The Plutoos PL11828 keeps the routine intact — a drop-in bag for the X40, X50 and L10s auto-empty station in 5-layer tear-resistant fleece that keeps fine dust, pollen and allergens sealed in the bag.Ten bags is the long-run format: around 10 months of normal auto-emptying from one order. Change when the station reports full — the closure seals the old bag as you lift it out, the new one clicks in, and the robot goes back to looking after itself.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMulti-layer fleece dust bagFilter layers5-layerMaterialFleece (synthetic, tear-resistant)Pack count10 per packCompatible vacuum models✓ Dreame X40✓ Dreame X50✓ Dreame L10s⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11828 fit all the models listed?Yes — it is a drop-in fit for Dreame X40, X50 and L10s. No tools, no modification needed.How many bags are in the pack and how long do they last?Under normal household use one bag lasts about 4–6 weeks. The 10-pack keeps the auto-empty station supplied for around 10 months from a single order.Are these original parts or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price, clearly below the manufacturer's bags.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × HEPA Filters for Philips SpeedPro Aqua FC8009 Cordless Vacuum – washable
2 × HEPA Filter for Philips SpeedPro / SpeedPro Aqua — full suction to the last roomFits Philips SpeedPro · SpeedPro Aqua · FC8009 · FC8010 — washable, HEPA class, smart two-filter rotation✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stockMade for Philips SpeedPro, SpeedPro Aqua and FC8009: the Plutoos PL11675 replaces the tired filter that has been quietly throttling your Philips. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.When the SpeedPro starts strong in the hallway and gives up by the bedroom — going over the same crumbs twice — the filter is saturated. A fresh Plutoos filter brings the pull back for the whole flat, and because this is a 2-pack you can run the smart rotation: one filter in the vacuum while the freshly washed one dries. HEPA-class filtration keeps fine dust and pollen in the filter instead of in the room air. Drop-in fit, no tools — and your vacuum's warranty stays untouched.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeHEPA replacement filterFiltration classHEPA (≥99.5% at 0.3 µm)WashableYes — cold water, no detergentRecommended changeEvery 3–6 monthsPack count2 per packMaterialMulti-layer microfibre and glass-fibre weaveCompatible vacuum models✓ Philips SpeedPro · SpeedPro Aqua · FC8009 · FC8010⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Filter change in 4 stepsSwitch the vacuum off.Remove the old filter — twist or bayonet catch depending on the model.Insert the Plutoos filter until it audibly clicks or sits firmly.Done — it is a direct replacement, no tools needed.Care & replacementWashing the filterRinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.Drying — the step people rushLet the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.When to replaceThe recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.TroubleshootingSymptomSolutionSuction still weak right after the filter changeTake the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well.Dusty or damp smell after washingThe filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor.Frequently asked questionsDoes the Plutoos PL11675 fit all the models listed?Yes — it is a drop-in fit for Philips SpeedPro, SpeedPro Aqua, FC8009, FC8010. No tools, no modification needed.How often should the filter be changed?Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.Is the filter suitable for allergy sufferers?Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit and filtration before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Floor Stand White for Dyson V15 V12 V11
Plutoos Floor Stand for Dyson — white, freestanding, no drillingFor Dyson V15 V12 V11 · docking place plus 4 accessory hooks✓ No drilling, no wall damage🧹 Vacuum docked and always ready🇨🇭 Swiss stockThis freestanding metal stand gives your Dyson V15, V12 or V11 a fixed home without a single hole in the wall: a stable base plate and a two-part column hold the vacuum docked and ready to grab, and four hooks keep floor heads and nozzles in one place. Screws and the assembly tool are included — set-up takes minutes, and because the wall stays untouched it is ideal for rented flats.The original wall dock assumes you are allowed — and willing — to drill into your wall. With this stand the vacuum parks upright in the hallway or utility room instead of leaning in a corner, and the accessories stop migrating through the household. In white, it blends into bright walls and modern interiors instead of standing out. Checked before dispatch, 60-day return unopened.Free dispatch from our Swiss warehouse — delivery on the next working day (at the latest the 2nd).Package contentsItemDetails1 × Floor stand, whiteTwo-part metal column with stable base plate and 4 accessory hooksScrews + assembly toolEverything needed for set-up — no drilling, no wall plugsCompatible vacuum models✓ Dyson V15 (all variants)✓ Dyson V12 (all variants)✓ Dyson V11 (all variants)Assembly in 4 stepsScrew the two column sections together with the included screws.Mount the column upright on the base plate.Hang the four accessory hooks and your attachments in place.Dock the vacuum into the holder — ready.Frequently asked questionsDo I have to fix the stand to the wall or floor?No — the weighted base plate keeps it freestanding and stable on any flat floor; walls stay untouched.Can the vacuum charge while it is docked?Yes — route your original Dyson charging cable to the stand and plug it in as usual, so the vacuum is charged right where it parks.How fast is delivery?Free dispatch from our Swiss warehouse — delivery on the next working day, at the latest the 2nd.✓ Checked before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × Mop Pads for Dreame X40 L40 L10s Ultra
4 × Mop Pads for Dreame X40 / L40 / L10s Ultra — rotation instead of reorderingFits Dreame X40 · L40 · L10s Ultra — microfibre, washable up to 60 °C, 4 in one pack✓ Drop-in fit like the original🧼 Washable up to 60 °C📦 4 per pack💎 Outlasts standard pads🇨🇭 Swiss stockYour Dreame X40, L40 or L10s Ultra mops nearly every day — its pads deserve a rotation. The Plutoos PL11862 delivers 4 fresh microfibre pads: one set on the robot, the rest washed and drying, so the machine never mops with a damp, tired pad. Drop-in fit on the original mounting, no tools, no modification.All 4 pads are machine-washable up to 60 °C — hygiene you can smell, especially with pets and kids on the floor. Premium microfibre means each pad survives significantly more mopping runs than the manufacturer's standard pads, hard floors included. Every pad is checked for fit before dispatch, clearly cheaper than the original part, and unopened packs can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMicrofibre mop padWashableYes — up to 60 °CDryingAir-drying recommendedPack count4 per packCompatible robot vacuum models✓ Dreame X40✓ Dreame L40✓ Dreame L10s Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad off the mounting.Align the Plutoos pad and press it on until it sits flat.Moisten the pad briefly before first use — better mopping from the first pass.Done — it is a direct replacement, no tools needed.Care & replacementWashing the padsRinse pads under warm water after mopping and let them air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable they take up to 60 °C.Rotate, don't waitKeep one set on the robot and the rest drying — a dry, fluffy pad absorbs visibly better than one that never fully dries between runs.When to replaceReplace a pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and swap in a fresh pad from the pack. Also refill the water tank before long runs.Pad comes loose during moppingPress the pad evenly onto the whole mounting surface and check it sits flat before starting the run.Frequently asked questionsDoes the Plutoos PL11862 fit all the models listed?Yes — it is a drop-in fit for Dreame X40, L40 and L10s Ultra. No tools, no modification needed.How often do the mop pads need changing?Pads can be machine-washed after every run at up to 60 °C. Replace them after 100-150 washes or once the material loses its absorbency.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland