Accessories & spare parts for robot vacuum cleaners: bags, filters, brushes, mop pads, cleaning solution. Compatible with Roborock, Dreame, Xiaomi. Free shipping CH/LI.
Discover high-quality robot accessories to bring your vacuum & mop robot back to full performance. At Plutoos you’ll find precise-fit dust bags, filters, main & side brushes, durable mop pads, and practical accessory kits. Our selection is compatible with popular Roborock, Dreame, and Xiaomi models — from Q Revo and the S-Series to X10+–X40. For sparkling floors, try our Robo Mop cleaning solution with a Swiss formula: microplastic-free and animal-friendly. With Swiss stock, you benefit from short delivery times; shipping within Switzerland and Liechtenstein is free. Pay easily with TWINT, PostFinance, card, PayPal, or by invoice. Quickly refresh filters, brushes, and pads — for cleaner results with less effort every day.
robot accessories, roborock accessories, dreame accessories, xiaomi robot accessories, q revo accessories, s7 accessories, robot mop pads, robot filter bags, robot brush replacement, robo mop cleaning solution, robot cloths replacement, robot spare parts set
Plutoos 6 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra auto-empty station – 5-layer fleece, incl. 4 mop cloths
6 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra — hands off the dustFits the X10+ · X20+ · L10s Ultra · L20 Ultra auto-empty station — 5-layer fleece, incl. 4 mop cloths✓ Drop-in fit like the original🧵 5-layer fleece — dust stays sealed📦 6-bag supply pack🇨🇭 Swiss stockYou bought a robot with an auto-empty station precisely so you would stop handling dust — a full station bag ends that comfort abruptly. The Plutoos PL11770 keeps your Xiaomi X10+ or X20+ and Dreame L10s Ultra or L20 Ultra emptying itself: 5-layer tear-resistant fleece holds fine dust, pollen and allergens sealed in the bag, hygienically closed the moment you lift it out.The pack is a small service kit in one order: 6 dust bags plus 4 mop cloths for the station, so bag change and mop refresh happen together. Under normal use one bag lasts about 4–6 weeks — around 6 months of auto-emptying — and each bag is a drop-in fit, no tools needed.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMulti-layer fleece dust bagFilter layers5-layerMaterialFleece (synthetic, tear-resistant)Pack count6 per packCompatible vacuum models✓ Xiaomi X10+✓ Xiaomi / Dreame X20+✓ Dreame L10s Ultra✓ Xiaomi / Dreame L20 Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11770 fit all the models listed?Yes — it is a drop-in fit for Xiaomi X10+, X20+, Dreame L10s Ultra and L20 Ultra. No tools, no modification needed.How many bags are in the pack and how long do they last?Under normal household use one bag lasts about 4–6 weeks. The 6-pack keeps the auto-empty station supplied for around 6 months from a single order.What exactly is in the pack?6 Plutoos dust bags plus 4 mop cloths for the station — the mop refresh comes along in the same order.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Mop Pads for Dreame X40 L40 L10s Ultra
Mop Pads for Dreame X40 / L40 / L10s Ultra — holder included, click in and mopFits Dreame X40 · L40 · L10s Ultra — microfibre, washable up to 60 °C, incl. mop pad holder✓ Drop-in fit like the original🧼 Washable up to 60 °C📦 Holder included💎 Outlasts standard pads🇨🇭 Swiss stockWhen a mop pad is worn — or its holder cracked from a bump too many — mopping quality drops long before the robot complains. The Plutoos PL11826 replaces both at once for your Dreame X40, L40 or L10s Ultra: a microfibre mop pad with the matching holder included, so the complete unit clicks back under the robot like the original. Drop-in fit, no tools, no modification.The pad is machine-washable up to 60 °C and goes back on its holder in seconds — hygienic mopping without buying a whole spare set from the manufacturer. Thanks to its premium microfibre it also keeps going significantly longer than the manufacturer's standard original pad, hard floors included. Checked for fit before dispatch, clearly cheaper than the original part, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMicrofibre mop padWashableYes — up to 60 °CDryingAir-drying recommendedPack count1 per packIncludedMop pad holderCompatible robot vacuum models✓ Dreame X40✓ Dreame L40✓ Dreame L10s Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad or the complete holder off the robot.Press the Plutoos pad onto the holder and click the holder back under the robot.Moisten the pad briefly before first use — better mopping from the first pass.Done — it is a direct replacement, no tools needed.Care & replacementWashing the padRinse the pad under warm water after mopping and let it air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable it takes up to 60 °C.The holderWipe the holder clean when you wash the pad and check the velcro surface — a clean, intact holder keeps the pad flat on the floor.When to replaceReplace the pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and let it dry fully before the next run. Also refill the water tank before long runs.Pad comes loose during moppingPress the pad evenly onto the whole velcro surface of the holder and check the holder is clicked in properly.Frequently asked questionsDoes the Plutoos PL11826 fit all the models listed?Yes — it is a drop-in fit for Dreame X40, L40 and L10s Ultra. No tools, no modification needed.Is the holder really included?Yes — the delivery includes the mop pad with its holder, so you can replace the complete unit, not just the cloth.How often does the mop pad need changing?The pad can be machine-washed after every run at up to 60 °C. Replace it after 100-150 washes or once the material loses its absorbency.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × Mop Pads for Dreame X40 L40 L10s Ultra
4 × Mop Pads for Dreame X40 / L40 / L10s Ultra — rotation instead of reorderingFits Dreame X40 · L40 · L10s Ultra — microfibre, washable up to 60 °C, 4 in one pack✓ Drop-in fit like the original🧼 Washable up to 60 °C📦 4 per pack💎 Outlasts standard pads🇨🇭 Swiss stockYour Dreame X40, L40 or L10s Ultra mops nearly every day — its pads deserve a rotation. The Plutoos PL11862 delivers 4 fresh microfibre pads: one set on the robot, the rest washed and drying, so the machine never mops with a damp, tired pad. Drop-in fit on the original mounting, no tools, no modification.All 4 pads are machine-washable up to 60 °C — hygiene you can smell, especially with pets and kids on the floor. Premium microfibre means each pad survives significantly more mopping runs than the manufacturer's standard pads, hard floors included. Every pad is checked for fit before dispatch, clearly cheaper than the original part, and unopened packs can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMicrofibre mop padWashableYes — up to 60 °CDryingAir-drying recommendedPack count4 per packCompatible robot vacuum models✓ Dreame X40✓ Dreame L40✓ Dreame L10s Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad off the mounting.Align the Plutoos pad and press it on until it sits flat.Moisten the pad briefly before first use — better mopping from the first pass.Done — it is a direct replacement, no tools needed.Care & replacementWashing the padsRinse pads under warm water after mopping and let them air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable they take up to 60 °C.Rotate, don't waitKeep one set on the robot and the rest drying — a dry, fluffy pad absorbs visibly better than one that never fully dries between runs.When to replaceReplace a pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and swap in a fresh pad from the pack. Also refill the water tank before long runs.Pad comes loose during moppingPress the pad evenly onto the whole mounting surface and check it sits flat before starting the run.Frequently asked questionsDoes the Plutoos PL11862 fit all the models listed?Yes — it is a drop-in fit for Dreame X40, L40 and L10s Ultra. No tools, no modification needed.How often do the mop pads need changing?Pads can be machine-washed after every run at up to 60 °C. Replace them after 100-150 washes or once the material loses its absorbency.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Accessory Kit for Dreame L10 L10s Ultra L10 Ultra
Accessory Kit for Dreame L10s Ultra / L10 Ultra / L10 — 14 parts for a year of clean floorsFits the Dreame models listed on this page — 14 parts: main brush, side brushes, filters, dust bags and round mop pads✓ Drop-in fit like the original📦 14-part maintenance kit🔄 Round rotary mop pads🇨🇭 Swiss stockBrushes, filters, dust bags and mop pads all wear at their own pace — and reordering them one by one means your Dreame is always waiting for something. The Plutoos PL11772 restocks the whole robot in one order: 1 main brush, 4 side brushes, 2 filters, 2 dust bags for the station, 4 round rotary mop pads and 1 cleaning tool — 14 parts, each a drop-in replacement for the original.Changed on the recommended 3–6-month rhythm, one kit carries your robot through a full year of vacuuming and mopping — with fresh bags in the station and hygienic pads under the robot. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for Dreame robotsMain brush1 × all-rubber roller, Dreame typeSide brushes4 ×Filters2 × — washable, cold waterDust bags2 × — for the auto-empty station, single useMop pads4 × round rotary pads — washableTool included1 × cleaning toolRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ Dreame L10✓ Dreame L10s Ultra✓ Dreame L10 Ultra✓ Dreame X20+✓ Dreame X10+⚠️ This kit contains round rotary mop pads and station dust bags — before ordering, check that your model uses round rotary pads (not a flat mop plate). Not sure? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush, pad or bag.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.Brushes & mop padsCut wrapped hair from the brushes with scissors and wipe them damp. Wash the round mop pads after mopping and let them air-dry; replace once the fibre is worn.Dust bagsDust bags are single-use — swap in a fresh bag when the station reports it full, and never empty and reuse a bag.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter out and refit it until it sits firmly — a filter that is not fully seated lets air slip past it. Empty the dust bin as well.Mop pads leave streaksWash the pads and let them dry fully, or rotate in the fresh pads from the kit — matted fibre stops absorbing.Frequently asked questionsDoes the Plutoos PL11772 fit all the models listed?It is a drop-in fit for the Dreame models listed above. The kit uses round rotary mop pads — if your model mops with a flat plate, contact us first and we check compatibility for you.What exactly is in the kit?1 main brush, 4 side brushes, 2 filters, 2 dust bags, 4 round rotary mop pads and 1 cleaning tool — 14 parts in total.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Accessory Kit for Roborock Q Revo Qrevo S Qrevo Pro
Accessory Kit for Roborock Q Revo / Qrevo S / Qrevo Pro — dust bags and mop pads for the whole yearFits Roborock Q Revo · Qrevo S · Qrevo Pro · Qrevo MaxV · Qrevo Master — 6 dust bags + 4 round rotary mop pads✓ Drop-in fit like the original📦 6 dust bags + 4 mop pads🧼 Washable rotary mop pads🇨🇭 Swiss stockThe two things a Qrevo owner runs out of are always the same: station dust bags and fresh mop pads. The Plutoos PL11773 restocks exactly these — 6 dust bags for the auto-empty station and 4 round rotary mop pads, 10 parts in total, drop-in compatible with Roborock Q Revo, Qrevo S, Qrevo Pro, Qrevo MaxV and Qrevo Master. This kit deliberately contains bags and pads only — the parts you actually replace most often.6 bags cover roughly a year of auto-emptying in a normal household, and with 4 pads in rotation there is always a clean, dry pad under the robot instead of yesterday's damp one. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeDust bag + mop pad kit for Roborock Qrevo seriesDust bags6 × for the auto-empty station — single useMop pads4 × round rotary pads — washable and reusableKit containsBags and pads only — no other partsCompatible robot vacuum models✓ Roborock Q Revo✓ Roborock Qrevo S✓ Roborock Qrevo Pro✓ Roborock Qrevo MaxV✓ Roborock Qrevo Master⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag & pad change in 4 stepsSwitch the robot and station off.Dust bag: open the station, lift the full bag out by its plate and click the fresh bag in.Mop pads: pull the worn pad off and press the Plutoos pad onto the holder until it sits flat.Done — both are direct replacements, no tools needed.Care & replacementDust bagsDust bags are single-use — swap in a fresh bag when the station reports it full, and never empty and reuse a bag; the fine dust stays sealed inside.Mop padsWash the round pads after mopping and let them air-dry. Rotate the 4 pads so a dry one is always ready.When to replace padsReplace a pad once the fibre is matted or streaks stay on the floor — with washing and rotation the pads last many months.TroubleshootingSymptomSolutionStation keeps reporting a full bagCheck the fresh bag is clicked in flat on its plate — a bag that sits at an angle seals badly and triggers the full warning early.Mop pads leave streaksWash the pads and let them dry fully, or rotate in a fresh pad from the kit — matted fibre stops absorbing.Frequently asked questionsDoes the Plutoos PL11773 fit all the models listed?Yes — it is a drop-in fit for Roborock Q Revo, Qrevo S, Qrevo Pro, Qrevo MaxV and Qrevo Master. No tools, no modification needed.What exactly is in the kit?6 dust bags for the auto-empty station and 4 round rotary mop pads — 10 parts. This kit contains bags and pads only.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Accessory Kit for Roborock S7 S7+ S7 Plus
Accessory Kit for Roborock S7 / S7+ / S7 Plus — a full year of wear parts in one boxFits Roborock S7 · S7+ · S7 Plus · S7 MaxV · S7 Pro — 20 parts: main and side brushes, filters, mop cloths and two small tools✓ Drop-in fit like the original📦 20-part maintenance kit🧼 Washable filters & mop cloths🇨🇭 Swiss stockYour Roborock cleans almost every day — and its brushes, filters and mop cloths quietly wear down doing so. The Plutoos PL11677 restocks all of them in one order: 2 main brushes, 6 side brushes, 4 filters, 6 mop cloths, plus a screwdriver and a cleaning brush for the change itself — 20 parts, each a drop-in replacement for the original on your Roborock S7, S7+, S7 Plus, S7 MaxV or S7 Pro. No tools beyond the ones included, no modification.Instead of reordering a single side brush every few weeks, you change wear parts on the recommended 3–6-month rhythm straight from this box — one order covers a full year of maintenance, and your robot keeps vacuuming and mopping like it did on day one. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for Roborock S7 seriesMain brushes2 × all-rubber roller, S7 typeSide brushes6 ×Filters4 × — washable, cold waterMop cloths6 × microfibre — washable and reusableTools included1 × screwdriver, 1 × cleaning brushRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ Roborock S7✓ Roborock S7+✓ Roborock S7 Plus✓ Roborock S7 MaxV✓ Roborock S7 Pro⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush or mop cloth.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.BrushesCut wrapped hair away with scissors and wipe the brush with a damp cloth. Change main and side brushes when the bristles or rubber fins are visibly worn.Mop clothsWash the cloths after mopping and let them air-dry. Swap in a fresh cloth once the fibre is worn or streaks stay on the floor.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter out and refit it until it sits firmly — a filter that is not fully seated lets air slip past it. Empty the dust bin as well.Side brush not spinning properlyRemove the brush, clear hair from the mount with the included cleaning brush, and press the brush back on until it clicks.Frequently asked questionsDoes the Plutoos PL11677 fit all the models listed?Yes — it is a drop-in fit for Roborock S7, S7+, S7 Plus, S7 MaxV and S7 Pro. No modification needed.What exactly is in the kit?2 main brushes, 6 side brushes, 4 filters, 6 mop cloths, 1 screwdriver and 1 cleaning brush — 20 parts, the wear parts your robot needs through the year.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Accessory Kit for Roborock S7 S7 Plus S7 MaxV
Accessory Kit for Roborock S7 / S7 Plus / S7 MaxV — brushes, filters and mop cloths in one orderFits Roborock S7 · S7 Plus · S7 MaxV · S7 MaxV Ultra · S7 Pro — main and side brushes, filters, mop cloths and small maintenance tools✓ Drop-in fit like the original📦 Complete wear-part kit🧼 Washable filters & mop cloths🇨🇭 Swiss stockThe Plutoos PL11751 is the restock order for your Roborock S7 family: main brushes, side brushes, filters and mop cloths — the parts that wear out with daily cleaning — plus small maintenance tools for the change itself. Every part is a drop-in replacement for the original on your Roborock S7, S7 Plus, S7 MaxV, S7 MaxV Ultra or S7 Pro: old part out, Plutoos part in, no modification.Changed on the recommended 3–6-month rhythm, one kit keeps your robot vacuuming and mopping at full strength through the year — without a single-brush reorder every few weeks. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for Roborock S7 seriesMain brushesAll-rubber roller, S7 typeSide brushesIncludedFiltersWashable, cold waterMop clothsMicrofibre — washable and reusableSmall toolsMaintenance tools for the part changeRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ Roborock S7✓ Roborock S7 Plus✓ Roborock S7 MaxV✓ Roborock S7 MaxV Ultra✓ Roborock S7 Pro⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush or mop cloth.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.BrushesCut wrapped hair away with scissors and wipe the brush with a damp cloth. Change main and side brushes when the bristles or rubber fins are visibly worn.Mop clothsWash the cloths after mopping and let them air-dry. Swap in a fresh cloth once the fibre is worn or streaks stay on the floor.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter out and refit it until it sits firmly — a filter that is not fully seated lets air slip past it. Empty the dust bin as well.Side brush not spinning properlyRemove the brush, clear hair and threads from the mount, and press the brush back on until it clicks.Frequently asked questionsDoes the Plutoos PL11751 fit all the models listed?Yes — it is a drop-in fit for Roborock S7, S7 Plus, S7 MaxV, S7 MaxV Ultra and S7 Pro. No modification needed.What exactly is in the kit?Main brushes, side brushes, filters and mop cloths — the key wear parts for your robot — plus small maintenance tools for the change.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 8 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra auto-empty station – 5-layer fleece
8 × Dust Bags for Xiaomi / Dreame X10+ X20+ L10s Ultra — auto-emptying back to workFits the X10+ · X20+ · L10s Ultra · L20 Ultra · L10 Ultra auto-empty station — 5-layer fleece✓ Drop-in fit like the original🧵 5-layer fleece — dust stays sealed📦 8-bag supply pack🇨🇭 Swiss stockThe station reports bag full — and from that moment your Xiaomi X10+, X20+ or Dreame L10s Ultra is a robot that collects dust but cannot get rid of it. The Plutoos PL11771 puts auto-emptying back to work: a drop-in station bag in 5-layer tear-resistant fleece that keeps fine dust, pollen and allergens sealed inside — sealed again by the closure when it comes out.Eight bags in one order keep the cycle running for around 8 months of normal use: change when the station reports full, drop the closed bag in the bin, click the fresh one in. No tools, no dust cloud, no reordering every few weeks.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMulti-layer fleece dust bagFilter layers5-layerMaterialFleece (synthetic, tear-resistant)Pack count8 per packCompatible vacuum models✓ Xiaomi X10+✓ Xiaomi / Dreame X20+✓ Dreame L10s Ultra✓ Xiaomi / Dreame L20 Ultra✓ Xiaomi / Dreame L10 Ultra⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11771 fit all the models listed?Yes — it is a drop-in fit for Xiaomi X10+, X20+, Dreame L10s Ultra, L20 Ultra and L10 Ultra. No tools, no modification needed.How many bags are in the pack and how long do they last?Under normal household use one bag lasts about 4–6 weeks. The 8-pack keeps the auto-empty station supplied for around 8 months from a single order.Are these original parts or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price, clearly below the manufacturer's bags.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 8 × Dust Bags for Dreame D10 Plus D10s Plus auto-empty station – 2.5 L capacity
8 × Dust Bags for Dreame D10 Plus / D10s Plus — auto-emptying that keeps workingFits the D10 Plus · D10s Plus auto-empty station — 2.5 L capacity per bag, drop-in fit✓ Drop-in fit like the original🧺 2.5 L bag capacity📦 8-bag supply pack🇨🇭 Swiss stockYour Dreame D10 Plus cleans on its own — until the station's bag is full and the auto-emptying quietly stops doing its job mid-week. The Plutoos PL11769 is the drop-in replacement bag for the Dreame D10 Plus and D10s Plus auto-empty station: 2.5 L of capacity per bag, so the robot keeps emptying itself for weeks at a stretch.Changing takes seconds: station open, full bag out — the closure seals the contents as you lift it — fresh bag in until it clicks. With 8 bags in one order the station stays supplied for months of hands-off cleaning, and disposal stays hygienic: no dust cloud over the bin.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeDust bag for auto-empty stationCapacity2.5 LPack count8 per packCompatible vacuum models✓ Dreame D10 Plus✓ Dreame D10s Plus⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11769 fit all the models listed?Yes — it is a drop-in fit for the Dreame D10 Plus and D10s Plus. No tools, no modification needed.When should the bag be changed?As soon as the station reports full or suction during auto-emptying fades. Dust bags are single-use — never empty and reuse a bag; insert a fresh one instead.Are these original parts or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price, clearly below the manufacturer's bags.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × Mop Pads for Dreame X10+ X20+ S20+
2 × Mop Pads for Dreame X10+ / X20+ / S20+ — one mopping, one dryingFits Dreame X10+ · X20+ · S20+ · S10+ — microfibre, washable up to 60 °C, 2 in one pack✓ Drop-in fit like the original🧼 Washable up to 60 °C📦 2 per pack💎 Outlasts standard pads🇨🇭 Swiss stockThe simplest mopping upgrade for your Dreame X10+, X20+, S20+ or S10+: a second set of pads. The Plutoos PL11859 puts 2 fresh microfibre pads in your cupboard — one mops while the other washes and dries, so the robot never has to run with a damp, tired pad again. Drop-in fit on the original holder, no tools, no modification.Both pads are machine-washable up to 60 °C, checked for fit before dispatch and clearly cheaper than the original part. Their premium microfibre also holds up significantly longer than the manufacturer's standard original pads, even on hard floors. Unopened packs can come back within 60 days, and if anything is unclear our Swiss team is one email away.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMicrofibre mop padWashableYes — up to 60 °CDryingAir-drying recommendedPack count2 per packCompatible robot vacuum models✓ Dreame X10+✓ Dreame X20+✓ Dreame S20+✓ Dreame S10+⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad off the holder plate.Align the Plutoos pad and press it onto the velcro plate.Moisten the pad briefly before first use — better mopping from the first pass.Done — it is a direct replacement, no tools needed.Care & replacementWashing the padsRinse pads under warm water after mopping and let them air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable they take up to 60 °C.Rotate, don't waitKeep one pad on the robot and the other drying — a dry, fluffy pad absorbs visibly better than one that never fully dries between runs.When to replaceReplace a pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and swap in the second pad from the pack. Also refill the water tank before long runs.Pad comes loose during moppingPress the pad evenly onto the whole velcro surface and check the holder plate is clicked in properly.Frequently asked questionsDoes the Plutoos PL11859 fit all the models listed?Yes — it is a drop-in fit for Dreame X10+, X20+, S20+ and S10+. No tools, no modification needed.How often do the mop pads need changing?Pads can be machine-washed after every run at up to 60 °C. Replace them after 100-150 washes or once the material loses its absorbency.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Universal Robot Mop Floor Cleaner 500 ml = 100 l for iRobot Roborock Ecovacs Dreame Xiaomi & manual mopping — microplastic-free & pet-safe
💧 500 ml = 100 liters of cleaning solutionUniversal for iRobot · Roborock · Ecovacs · Dreame · Xiaomi & manual mopping — a fraction of the per-liter price of ready-to-use cleaners. 🐾 pet-safe 🌊 microplastic-free ✅ ZRC safety-assessed 🌿 plant fragrance A clean floor without effort, a light scent of plant aromas in the room, and the reassuring feeling that everything your robot mop spreads is safe for your family and your four-legged friends — that is exactly what the Plutoos Universal Robot Mop Floor Cleaner is made for. And it is outstanding value for money: one 500 ml bottle gives you a full 100 liters of ready cleaning solution. The balanced formula is 92.85% water-based and works gently but reliably: mild surfactants dissolve everyday dirt, a water softener prevents limescale streaks on tiles and glass, and the plant fragrance leaves a fresh, subtle scent. No microplastics, no aggressive bleach — safe around playing children and sniffing paws. A truly universal solution: compatible with the five big robot mop brands — iRobot, Roborock, Ecovacs, Dreame and Xiaomi — and just as suitable for the classic bucket and manual mop. Exceptionally economical: only 5 ml per 1 liter of water — a fraction of the per-liter price of typical ready-to-use cleaners. Same-working-day dispatch from our Swiss warehouse, delivery mostly the next working day. Compatible robot mop brandsiRobot — Roomba Combo j5/j7/j9, Braava jet m6, all mopping models Roborock — S7, S7 MaxV, S8, S8 Pro Ultra, Qrevo, Saros series Ecovacs — Deebot Ozmo series, X1/X2, T20, T30, N20 Pro Plus Dreame — L10s Ultra, L20 Ultra, X20/X30/X40 Ultra, D series Xiaomi — Mi Robot Vacuum-Mop, X10/X20, Vacuum S10/S20 Note: If unsure about your model, check your robot's manual for "cleaning solution" — if approved, our solution is compatible. Also suitable for manual floor cleaning with bucket and mop. Why this cleaner is good for your home💧 Extremely economical: 5 ml per liter — 500 ml yields ~100 liters of solution, far cheaper per liter than typical ready-to-use cleaners 🌊 Microplastic-free formula: 92.85% water base with fully dissolved ingredients — no plastic particles into the Swiss wastewater system, good for lakes, rivers and drinking water 🐾 Pet-safe formula: independently safety-assessed — no harm on skin contact, no known irritation or sensitization effects. Cats, dogs and rabbits can walk over the dried floor without concern 🌿 Plant fragrance instead of synthetic perfume — subtle, fades after a short drying time 💦 92.85% water base: mild enough for the daily mopping routine 🚿 Water softener against limescale streaks — a real difference in hard-water regions 🦠 Gentle antibacterial effect (bacteriostatic quaternary ammonium salt, only 0.1%) ✅ Independently safety-assessed: ZRC report per ISO 11014-2009 — not classified as hazardous (EC 1272/2008), non-flammable, non-corrosive Package contents1 × Plutoos Universal Robot Mop Floor Cleaner, 500 ml (yields ~100 liters of solution) Usage & dosageWay 1 — directly into the station's solution container (undiluted): If your robot's station has a dedicated container for cleaning solution (e.g. Roborock S8 MaxV Ultra / Qrevo Master & Curv, Dreame X40 Ultra, Ecovacs Deebot X2 Omni — check your manual), pour the solution in directly and undiluted. The station doses and mixes it automatically with every mopping run — no manual mixing needed. Use only if the manufacturer explicitly allows cleaning agents. Way 2 — manual dilution: 5 ml per 1 liter of water into the fresh-water tank. The 500 ml bottle yields ~100 liters of solution — 300–500 mopping runs depending on the model. Way 3 — manual mopping: The same 5 ml per liter works in the bucket for classic hand mopping — one bottle covers robot and manual cleaning. Suitable floors: tiles, laminate, sealed parquet, vinyl, PVC, cork, marble — anything your robot is allowed to mop. Not for untreated wood. Rinse the tank with clear water after use. Care, storage & safetyStore cool, dry and out of reach of children; close the bottle tightly after use. Do not mix with other cleaning agents — especially bleach, strong acids or alkaline cleaners. Do not swallow; avoid eye contact — rinse with water if it occurs. If swallowed, drink water and seek medical advice. Non-flammable; not classified as hazardous (EC 1272/2008, ISO 11014-2009). Certified safety dataClassificationNot classified as hazardous (EC 1272/2008) · non-corrosive · non-flammable · not dangerous goods for transport Skin contactNo harm (per safety data sheet) InhalationNo harm by inhalation (per safety data sheet) Irritation / sensitizationNo known significant effects If swallowedHarmful if swallowed — drink water and seek medical advice; keep out of reach of children Eye contactRinse with plenty of water; seek medical advice Solubility / stabilityFully water-soluble; stable at normal temperature StandardSafety data sheet per ISO 11014-2009, assessed by ZRC (report ZRC2412040XY) Composition (certified)Water (CAS 7732-18-5)92.85%Water softener3.4%Surfactant3%Plant perfume0.3%Solubilizer0.3%Bacteriostatic quaternary ammonium salt0.1%Pigment (coloring)0.05% TroubleshootingProblemSolution Robot leaves too much water on the floorReduce the water-flow level in the robot's app (iRobot, Roborock, Ecovacs, Dreame and Xiaomi all offer a water setting) — or reduce the dosage to 3–4 ml per liter. Robot has no cleaning-agent approvalFor plain water tanks without approval: apply the solution to the mopping pad, not into the tank. Streaks on the floorReduce dosage (3–4 ml/l, especially with soft water); wash the pads — residues of old cleaners cause streaking. Smell in the tankEmpty the tank, rinse with clear water, let it dry open; do not leave solution in the tank for weeks. Station not dosingRinse the compartment and intake with warm water — remove dried-on residue. Shipping & returns✓ Free shipping (CH/FL) · ✓ Next-working-day delivery (latest the 2nd) · ✓ 60-day returns (unopened) · ✓ 14-day returns (opened, fees apply) · ✓ TWINT, PostFinance, Visa, Mastercard, invoice · ✓ Eco-friendly packaging FAQ❓ Does this cleaner really work with all major robot mop brands?Yes — the mild, balanced formula is safe for the pumps, hoses and pads of iRobot, Roborock, Ecovacs, Dreame and Xiaomi. It does not attack seals, leaves no residue and does not over-foam. If unsure, check your manual — if "cleaning solution" is approved, ours is compatible. ❓ Is the solution really pet-safe?Yes. No microplastics, no aggressive bleach or solvents; the bacteriostatic agent is used at a low 0.1% — cats, dogs and small animals can walk on the dried floor without concern. Still: do not let pets drink it, keep the bottle out of reach. ❓ How many mopping runs does a 500 ml bottle give?At 5 ml per liter the bottle yields around 100 liters of solution — about 300–500 mopping runs depending on the robot, typically several months of routine cleaning for an 80–100 m² home. ❓ On which floors can I use it?All hard floors your robot is approved to mop: tiles, laminate, sealed parquet, vinyl, PVC, cork, marble, natural stone. Not for untreated wood or open-pored natural materials. If unsure, test on an inconspicuous spot first. ❓ How fast is delivery?Ordered before 5 p.m. and in stock: your order leaves our Swiss warehouse the same working day — delivered mostly the next working day, latest the 2nd. Free shipping across Switzerland and Liechtenstein. Live stock and the expected delivery date are shown at the top next to the add-to-cart button — if an item is out of stock, we deliver as soon as possible, usually within 15 days.
Plutoos 2 × Mop Pads for Dreame L10 L10s L30 S10s X20 Series – round rotary pads, premium microfiber
2 × Round Rotary Mop Pads for Dreame — universal fit for rotary-mop modelsUniversal round rotary pads for many Dreame models — microfibre, washable up to 60 °C, 2 in one pack✓ Round rotary pad shape🧼 Washable up to 60 °C📦 2 per pack💎 Outlasts standard pads🇨🇭 Swiss stockA fresh pair for the spinning mops: the Plutoos PL11861 contains 2 universal round rotary mop pads for the many Dreame robots that mop with two rotating discs. Press them onto the rotary plates, mop, wash, repeat. Microfibre, drop-in mounting, no tools.Because this is a universal pad, one honest step comes first: compare the shape and size with the pads currently on your robot before ordering — round rotary pads look alike across models, and a quick look (or an email to us) saves a wrong purchase. Once matched, the pads are machine-washable up to 60 °C, checked before dispatch, and unopened packs can come back within 60 days. The premium microfibre weave takes hard floors in stride and lasts significantly longer than the manufacturer's standard original pads.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeRound rotary mop pad (universal, microfibre)WashableYes — up to 60 °CDryingAir-drying recommendedPack count2 per packCompatible robot vacuum models✓ Dreame L10 Ultra✓ Dreame L10s Pro Gen 2✓ Dreame L10s Pro Ultra✓ Dreame L10s Ultra✓ Dreame L10s Ultra Gen 2✓ Dreame L30 Pro Ultra✓ Dreame L30 Ultra✓ Dreame L30s Ultra✓ Dreame S10s Pro✓ Dreame X20 Pro✓ Dreame X20 Pro Plus⚠️ Universal pad — no specific model list. Before ordering, compare shape and size with the pads currently on your robot; if unsure, contact Plutoos and we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad off the rotary plate.Align the Plutoos pad and press it evenly onto the plate.Moisten the pad briefly before first use — better mopping from the first pass.Done — no tools needed.Care & replacementWashing the padsRinse pads under warm water after mopping and let them air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable they take up to 60 °C.Rotate, don't waitMount the fresh pair while the washed pair dries — a dry, fluffy pad absorbs visibly better than one that never fully dries between runs.When to replaceReplace a pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and let it dry fully before the next run. Also refill the water tank before long runs.Pad comes loose or wobbles while spinningPress the pad evenly and centred onto the rotary plate — an off-centre pad wobbles and mops unevenly. If the fit is not exact for your model, contact us.Frequently asked questionsWhich Dreame models does the Plutoos PL11861 fit?It is a universal round rotary pad for many Dreame models that mop with spinning discs. There is no specific model list — compare shape and size with your current pads, or send us your model and we check it for you.How often do the mop pads need changing?Pads can be machine-washed after every run at up to 60 °C. Replace them after 100-150 washes or once the material loses its absorbency.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They fit the rotary plates drop-in once shape and size match — the main difference to the original is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 26-Piece Accessory Kit for Dreame X50 Ultra Complete L50 Pro Ultra X50 Master L40s Pro Ultra Matrix10 Ultra Robot Vacuums
26-Piece Accessory Kit for Dreame X50 Ultra Complete / L50 Pro Ultra / X50 Master — everything the year needsFits Dreame X50 Ultra Complete · L50 Pro Ultra · X50 Master · L40s Pro Ultra · Matrix10 Ultra — brushes, dust bags, mop pads and filters✓ Drop-in fit like the original📦 26-piece maintenance kit🧼 Washable filters & mop pads🇨🇭 Swiss stockA flagship robot deserves a flagship restock. The Plutoos PL11907 covers your Dreame X50 Ultra Complete, L50 Pro Ultra, X50 Master, L40s Pro Ultra or Matrix10 Ultra with a 26-piece kit: 2 main brushes, 6 side brushes, 6 dust bags for the station, 6 mop pads and 4 filters. Every part is a drop-in replacement for the original — no tools, no modification.Changed on the recommended 3–6-month rhythm, one order carries the robot through a full year: fresh bags in the station, fresh pads under the robot, fresh brushes and filters in between — instead of a new small order every few weeks. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for Dreame robotsTotal parts26Main brushes2 ×Side brushes6 ×Dust bags6 × — for the auto-empty station, single useMop pads6 × — washableFilters4 × — washable, cold waterRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ Dreame X50 Ultra Complete✓ Dreame L50 Pro Ultra✓ Dreame X50 Master✓ Dreame L40s Pro Ultra✓ Dreame Matrix10 Ultra⚠️ Please check your exact robot model before ordering. Not sure? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush, pad or bag.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.Brushes & mop padsCut wrapped hair from the brushes with scissors and wipe them damp. Wash the mop pads after mopping and let them air-dry; replace once the fibre is worn.Dust bagsDust bags are single-use — swap in a fresh bag when the station reports it full, and never empty and reuse a bag.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter or dust bag out and refit it until it sits firmly — a part that is not fully seated lets air slip past it. Empty the dust bin as well.Side brush not spinning properlyRemove the brush, clear hair and threads from the mount, and press the brush back on until it sits firmly.Frequently asked questionsDoes the Plutoos PL11907 fit all the models listed?Yes — it is a drop-in fit for Dreame X50 Ultra Complete, L50 Pro Ultra, X50 Master, L40s Pro Ultra and Matrix10 Ultra. Please check your exact model before ordering.What exactly is in the kit?2 main brushes, 6 side brushes, 6 dust bags, 6 mop pads and 4 filters — the wear parts your robot and its station consume through the year.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 2 × Mop Rollers for ECOVACS DEEBOT X11 X9 X8 PRO OMNI T80 – antibacterial nylon
Plutoos Mop Rollers for ECOVACS DEEBOT – freshly fitted, it mops streak-free again2 × replacement rollers · high-density nylon with antibacterial agents · tool-free swap✓ For DEEBOT X11, X9, X8 PRO OMNI & T80🧫 Nylon fibre with antibacterial agents💧 Absorbent fibre – mops streak-free🇨🇭 Swiss stockYour DEEBOT dutifully does its rounds, but streaks remain on the tiles and the mop rollers look like they have been through a mud run? Mop rollers are wear parts – at some point the fibre no longer takes up water evenly. This Plutoos twin pack fits your robot with two fresh rollers.The fluffy, absorbent fibre made of high-density nylon takes up dirty water evenly and mops damp without streaks; the fibre is finished with antibacterial agents. The swap needs no tools, and a fresh pair is recommended every 3 to 6 months. Every set is checked for fit and function before dispatch, and unopened items can be returned within 60 days – so your DEEBOT mops like freshly unboxed again, without a new robot moving in.Free shipping from our Swiss warehouse – next-working-day delivery.Technical dataPropertyValuePackage contents2 × mop rollersMaterialhigh-density nylon with antibacterial agentsFibrefluffy and absorbent – for streak-free damp moppingSwaptool-freeRecommended replacementevery 3–6 monthsCompatibilityonly the DEEBOT models listedCompatible vacuum cleaner brands✓ ECOVACS DEEBOT X11 PRO OMNI✓ ECOVACS DEEBOT X11 OmniCyclone✓ ECOVACS DEEBOT X9 PRO OMNI✓ ECOVACS DEEBOT X8 PRO OMNI✓ ECOVACS DEEBOT T80 OMNI✓ ECOVACS DEEBOT T80S OMNI⚠️ Only for the listed models: ECOVACS DEEBOT X11 PRO OMNI, X11 OmniCyclone, X9 PRO OMNI, X8 PRO OMNI, T80 OMNI and T80S OMNI – explicitly not for other models of these series.Swap in 3 stepsSwitch off the robot and remove the used mop rollers – no tools needed.Insert the fresh Plutoos rollers until they sit noticeably firm.Start mopping – rinse or replace the rollers when performance fades.Care & cleaningRinse the rollers after moppingRinse the rollers regularly under lukewarm water and let them air-dry – the fibre stays absorbent.Replace in timeA fresh pair is recommended every 3 to 6 months – earlier with large mopping areas or heavy soiling.TroubleshootingSymptomSolutionRoller does not fit or sits looseCheck the model: the rollers fit exclusively the DEEBOT models listed above – not other models of the X or T series.Streaks while moppingRinse the rollers and let them dry; if the film remains, the fibre is worn – replace the rollers (recommended every 3–6 months).Frequently asked questionsWhich robots do the mop rollers fit?Exclusively the ECOVACS DEEBOT X11 PRO OMNI, DEEBOT X11 OmniCyclone, DEEBOT X9 PRO OMNI, DEEBOT X8 PRO OMNI, DEEBOT T80 OMNI and DEEBOT T80S OMNI – explicitly not other models of these series.How often should the rollers be replaced?A replacement every 3 to 6 months is recommended – correspondingly earlier with large mopping areas or heavy soiling.Do I need tools for the swap?No – the rollers are removed and inserted without any tools.How fast is delivery?Free shipping from our Swiss warehouse – delivery on the next working day, day 2 at the latest.✓ Checked for fit and function before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 17-Piece Accessory Kit for ECOVACS DEEBOT X9 PRO OMNI X11 PRO OMNI T80S OMNI Robot Vacuums
17-Piece Accessory Kit for ECOVACS DEEBOT X9 PRO OMNI / X11 PRO OMNI / T80S OMNI — one order, one maintained robotFits ECOVACS DEEBOT X9 PRO OMNI · X11 PRO OMNI · T80S OMNI — dust bags, brushes, filters, mop rollers and tools✓ Drop-in fit like the original📦 17-piece maintenance kit🧰 Cleaning brush & screwdriver included🇨🇭 Swiss stockYour DEEBOT's station empties, mops and washes — and quietly consumes bags, rollers and filters while doing it. The Plutoos PL11908 restocks the whole system for ECOVACS DEEBOT X9 PRO OMNI, X11 PRO OMNI and T80S OMNI: 4 dust bags, 4 side brushes, 4 filters, 1 main brush, 2 mop rollers, plus a cleaning brush and a screwdriver for the change itself — 17 pieces, each a drop-in replacement for the original.Changed on the recommended 3–6-month rhythm, one kit carries the robot through the year — no small reorders, no mopping with a worn roller. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for ECOVACS DEEBOT robotsTotal parts17Dust bags4 × — for the auto-empty station, single useSide brushes4 ×Filters4 × — washable, cold waterMain brush1 ×Mop rollers2 ×Tools included1 × cleaning brush, 1 × screwdriverRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ ECOVACS DEEBOT X9 PRO OMNI✓ ECOVACS DEEBOT X11 PRO OMNI✓ ECOVACS DEEBOT T80S OMNI⚠️ Please check your exact robot model before ordering. Not sure? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush, roller or bag.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.Brushes & mop rollersCut wrapped hair from the brushes with scissors and wipe them damp. Rinse the mop rollers after mopping and let them air-dry; replace once the surface is worn.Dust bagsDust bags are single-use — swap in a fresh bag when the station reports it full, and never empty and reuse a bag.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter or dust bag out and refit it until it sits firmly — a part that is not fully seated lets air slip past it. Empty the dust bin as well.Side brush not spinning properlyRemove the brush, clear hair and threads from the mount, and fix it back on firmly — the included screwdriver helps here.Frequently asked questionsDoes the Plutoos PL11908 fit all the models listed?Yes — it is a drop-in fit for ECOVACS DEEBOT X9 PRO OMNI, X11 PRO OMNI and T80S OMNI. Please check your exact model before ordering.What exactly is in the kit?4 dust bags, 4 side brushes, 4 filters, 1 main brush, 2 mop rollers, 1 cleaning brush and 1 screwdriver — 17 pieces in total.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 4 × Mop Pads for Dreame X30 X40 X50 L40 L50 S30 Series – round rotary pads, premium microfiber
4 × Round Rotary Mop Pads for Dreame — universal fit for rotary-mop modelsUniversal round rotary pads for many Dreame models — microfibre, washable up to 60 °C, 4 in one pack✓ Round rotary pad shape🧼 Washable up to 60 °C📦 4 per pack💎 Outlasts standard pads🇨🇭 Swiss stockThese are universal round rotary mop pads for the many Dreame robots that mop with two spinning discs. The Plutoos PL11860 puts 4 of them in rotation: press them onto the rotary plates, mop, wash, repeat — with a fresh pad always dry and ready. Microfibre, drop-in mounting, no tools.Because this is a universal pad, one honest step comes first: compare the shape and size with the pads currently on your robot before ordering — round rotary pads look alike across models, and a quick look (or an email to us) saves a wrong purchase. Once matched, the pads are machine-washable up to 60 °C, checked before dispatch, and unopened packs can come back within 60 days. Our premium microfibre is built to last and clearly outlives the manufacturer's standard pads, even on hard floors.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeRound rotary mop pad (universal, microfibre)WashableYes — up to 60 °CDryingAir-drying recommendedPack count4 per packCompatible robot vacuum models✓ Dreame L40✓ Dreame L40 Ultra✓ Dreame L40 Ultra Complete✓ Dreame L50 Pro Ultra✓ Dreame S30 Pro Ultra✓ Dreame X30✓ Dreame X30 Pro✓ Dreame X30 Ultra✓ Dreame X40 Master✓ Dreame X40 Pro✓ Dreame X40 Ultra✓ Dreame X50 Master✓ Dreame X50 Ultra Complete⚠️ Universal pad — no specific model list. Before ordering, compare shape and size with the pads currently on your robot; if unsure, contact Plutoos and we check compatibility for you. Good to know: the premium microfibre outlasts the manufacturer's standard original pads, even on hard floors.Pad change in 4 stepsTake the worn pad off the rotary plate.Align the Plutoos pad and press it evenly onto the plate.Moisten the pad briefly before first use — better mopping from the first pass.Done — no tools needed.Care & replacementWashing the padsRinse pads under warm water after mopping and let them air-dry. Machine wash at 30 °C without fabric softener, no tumble dryer — where marked machine-washable they take up to 60 °C.Rotate, don't waitKeep one pair on the robot and the rest drying — a dry, fluffy pad absorbs visibly better than one that never fully dries between runs.When to replaceReplace a pad after 100-150 washes, or sooner if the fibre is matted or streaks stay on the floor.TroubleshootingSymptomSolutionStreaks on the floor after moppingThe pad is saturated or worn — wash it and swap in a fresh pad from the pack. Also refill the water tank before long runs.Pad comes loose or wobbles while spinningPress the pad evenly and centred onto the rotary plate — an off-centre pad wobbles and mops unevenly. If the fit is not exact for your model, contact us.Frequently asked questionsWhich Dreame models does the Plutoos PL11860 fit?It is a universal round rotary pad for many Dreame models that mop with spinning discs. There is no specific model list — compare shape and size with your current pads, or send us your model and we check it for you.How often do the mop pads need changing?Pads can be machine-washed after every run at up to 60 °C. Replace them after 100-150 washes or once the material loses its absorbency.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They fit the rotary plates drop-in once shape and size match — the main difference to the original is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos 6 × Dust Bags for Roborock Saros 10 Saros 10R S8 MaxV Ultra auto-empty station – 5-layer fleece
6 × Dust Bags for Roborock Saros 10 / 10R / S8 MaxV Ultra — the dock keeps emptyingFits the Saros 10 · Saros 10R · S8 MaxV Ultra · Qrevo series auto-empty station — 5-layer fleece✓ Drop-in fit like the original🧵 5-layer fleece — dust stays sealed📦 6-bag supply pack🇨🇭 Swiss stockA Roborock Saros 10 or S8 MaxV Ultra does the vacuuming so you do not have to — but only for as long as its dock can empty the robot. The Plutoos PL11898 is the drop-in bag for the Saros 10, Saros 10R, S8 MaxV Ultra and Qrevo series auto-empty station: 5-layer tear-resistant fleece that traps fine dust, pollen and allergens and keeps them sealed until the bag lands, closed, in the bin.Six bags cover around 6 months of normal use — one order per half-year instead of a monthly reminder. The change itself is a ten-second job: full bag out, sealed by its closure; fresh bag in until it clicks — the manufacturer's app even shows the steps.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Technical dataPropertyValueTypeMulti-layer fleece dust bagFilter layers5-layerMaterialFleece (synthetic, tear-resistant)Pack count6 per packCompatible vacuum models✓ Roborock Saros 10✓ Roborock Saros 10R✓ Roborock S8 MaxV Ultra✓ Roborock Qrevo-Serie✓ Roborock Qrevo CurvX✓ Roborock S9 MaxV Slim✓ Roborock Qrevo Curv 2 Pro✓ Roborock Saros 20✓ Roborock S10 MaxV Slim✓ Roborock Qrevo Edge✓ Roborock QR 798✓ Roborock QR 598✓ Roborock QV 35A✓ Roborock QV 35S✓ Roborock Qrevo L✓ Roborock Qrevo✓ Roborock Qrevo Curv✓ Roborock Qrevo CurvC✓ Roborock Qrevo Curv S5X✓ Roborock Qrevo Curv 5A1✓ Roborock Qrevo Curv 5Xc✓ Roborock Qrevo 5Ae✓ Roborock Qrevo EdgeC⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Bag change in 4 stepsSwitch the robot or the station off.Open the station and pull the full bag out — the closure seals the contents as you lift it.Insert the Plutoos bag until it clicks into place.Close the station — done. No tools needed; the manufacturer's app also shows the bag-change steps.Care & replacementWhen to changeChange the bag as soon as the station reports full or suction fades. A full station bag means the robot can no longer empty itself and its own dustbin fills instead.Never empty and reuse a bagDust bags are single-use. Emptying a used bag releases exactly the fine dust the bag exists to trap — insert a fresh bag instead; that is the hygienic point of a bag system.DisposalDispose of the full bag closed in the household waste — the closure seals the contents, so no dust cloud over the bin.TroubleshootingSymptomSolutionStation reports full right after a bag changeTake the bag out and refit it until it clicks — a bag that is not seated correctly blocks the station's airflow. Also make sure the station cover is fully closed.Dusty smell during auto-emptyingThe bag is saturated — fit a fresh one. Dispose of the old bag closed; the closure seals the contents hygienically.Frequently asked questionsDoes the Plutoos PL11898 fit all the models listed?Yes — it is a drop-in fit for Roborock Saros 10, Saros 10R, S8 MaxV Ultra and the Qrevo series. No tools, no modification needed.How many bags are in the pack and how long do they last?Under normal household use one bag lasts about 4–6 weeks. The 6-pack keeps the auto-empty station supplied for around 6 months from a single order.Are these original parts or a compatible replacement?A compatible replacement by Plutoos. It meets the same specifications as the original and fits drop-in — the main difference is the price, clearly below the manufacturer's bags.Does compatible replacement void my vacuum's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland
Plutoos Accessory Kit for Roborock S6 S5 E Series
Accessory Kit for Roborock S6 / S5 / E Series — 10 parts, one maintenance orderFits the Mi S5 · S6 · E-series models listed on this page — main brush, side brushes, filters, mop cloths, cleaning tool and screws✓ Drop-in fit like the original📦 10-part maintenance kit🧼 Washable filters & mop cloths🇨🇭 Swiss stockOlder robots earn their keep — as long as their wear parts get refreshed. The Plutoos PL11825 is the complete 10-part maintenance order for the S5/S6/E generation: 1 main brush with combined bristles and rubber blades, 2 side brushes, 2 filters, 2 reusable half-moon mop cloths, 1 cleaning tool and 2 screws. Every part is a drop-in replacement for the original — old part out, Plutoos part in.Changed on the recommended 3–6-month rhythm, one kit keeps an S5 or S6 vacuuming and mopping like it used to — for clearly less than a stack of original parts. Every part is checked for fit before dispatch, and unopened items can come back within 60 days.Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.Package contentsPropertyValueTypeAccessory kit (wear-part set) for the S5/S6/E seriesMain brush1 × red/black — bristles and rubber blades combinedSide brushes2 × white, 3-armFilters2 × — washable, cold waterMop cloths2 × half-moon shape — washable and reusableAlso included1 × cleaning tool, 2 × screwsRecommended changeWear parts every 3–6 monthsCompatible robot vacuum models✓ Roborock S5✓ Roborock S5 Max✓ Roborock S50✓ Roborock S6✓ Roborock S6 Pure✓ Roborock S6 MaxV✓ Xiaomi Mi E2✓ Xiaomi Mi E4✓ Xiaomi Mi E5✓ Xiaomi Mi E35⚠️ Not sure which model you have? Contact Plutoos — we check compatibility for you.Part replacement in 4 stepsSwitch the robot and station off.Take out the worn part — filter, brush or mop cloth.Insert the Plutoos part until it clicks or sits firmly.Done — every part is a direct replacement; the manufacturer's app also shows change reminders.Care & replacementFiltersRinse monthly under cold water without soap and let them air-dry for a full 24 hours before they go back in. Replace on the 3–6-month rhythm.BrushesCut wrapped hair away with the cleaning tool or scissors and wipe the brush with a damp cloth. Change brushes when bristles or rubber blades are visibly worn.Mop clothsWash the half-moon cloths after mopping and let them air-dry. Swap in a fresh cloth once the fibre is worn or streaks stay on the floor.TroubleshootingSymptomSolutionSuction weak right after a part changeTake the filter out and refit it until it sits firmly — a filter that is not fully seated lets air slip past it. Empty the dust bin as well.Side brush not spinning properlyRemove the brush, clear hair from the mount, and screw it back on firmly with the included screws.Frequently asked questionsDoes the Plutoos PL11825 fit my robot?All compatible models are listed above — check yours in the list. The parts are direct replacements for the originals.What exactly is in the kit?1 main brush, 2 side brushes, 2 filters, 2 mop cloths, 1 cleaning tool and 2 screws — 10 parts in total.Are these original parts or compatible replacements?Compatible replacements from Plutoos. They meet the same specifications as the originals and fit drop-in — the main difference is the price.Does compatible replacement void my robot's warranty?No. Under EU and Swiss consumer law, using compatible spare parts can only affect your robot's warranty if the part demonstrably causes damage.How fast is delivery?Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.✓ Checked for fit before dispatch · 60-day return unopened · friendly email support from Switzerland