Plutoos HEPA Filter for Philips SpeedPro Aqua FC8009 Cordless Vacuum – washable (1 piece)
CHF 10.90
Free shipping
Available, delivery time: Next-day delivery*
Does this fit your vacuum cleaner?
Fits 11 models.
HEPA Filter for Philips SpeedPro / SpeedPro Aqua — full suction to the last room
Fits Philips SpeedPro · SpeedPro Aqua · FC8009 · FC8010 — washable, HEPA class, drop-in fit
✓ Drop-in fit like the original🌬️ HEPA class — ≥99.5% at 0.3 µm🧼 Washable — cold water, no detergent🇨🇭 Swiss stock
Made for Philips SpeedPro, SpeedPro Aqua and FC8009: the Plutoos PL13151 replaces the tired filter that has been quietly throttling your Philips. Filters are wear parts that clog with fine dust, pollen and pet hair — a fresh one every three to six months brings back factory suction and clean exhaust air. It reaches HEPA filtration class and captures ≥99.5% of fine particles from 0.3 µm — pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Washable in cold water without detergent, tested for seat and filtration efficiency before dispatch — and thanks to the drop-in shape the swap needs no tools and no modification.
When the SpeedPro starts strong in the hallway and gives up by the bedroom — going over the same crumbs twice — the filter is saturated. A fresh Plutoos filter brings the pull back for the whole flat. Ordered singly it is a straight one-for-one replacement — pick the multi-pack if you want to run the wash-and-swap rotation without downtime. HEPA-class filtration keeps fine dust and pollen in the filter instead of in the room air. Drop-in fit, no tools — and your vacuum's warranty stays untouched.
Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.
Technical data
| Property | Value |
|---|---|
| Type | HEPA replacement filter |
| Filtration class | HEPA (≥99.5% at 0.3 µm) |
| Washable | Yes — cold water, no detergent |
| Recommended change | Every 3–6 months |
| Pack count | 1 per pack |
| Material | Multi-layer microfibre and glass-fibre weave |
Compatible vacuum models
| ✓ Philips SpeedPro | ✓ Philips SpeedPro Aqua |
| ✓ Philips FC8009 | ✓ Philips FC8010 ✓ Philips FC6721 ✓ Philips FC6722 ✓ Philips FC6723 ✓ Philips FC6724 ✓ Philips FC6725 ✓ Philips FC6726 ✓ Philips FC6727 ✓ Philips FC6728 ✓ Philips FC6729 |
Filter change in 4 steps
- Switch the vacuum off.
- Remove the old filter — twist or bayonet catch depending on the model.
- Insert the Plutoos filter until it audibly clicks or sits firmly.
- Done — it is a direct replacement, no tools needed.
Care & replacement
Washing the filter
Rinse the filter monthly under cold running water — no soap, no brush, no detergent. Washing rinses out the fine dust that clogs the layers between changes.
Drying — the step people rush
Let the filter air-dry for at least 24 hours, better 48, before it goes back into the vacuum. A filter that is still damp can damage the motor — give it the full drying time.
When to replace
The recommended change is every 3–6 months. If the filter stays grey after washing or suction keeps fading, its layers are saturated — depending on use that point comes after 6–12 months.
Troubleshooting
| Symptom | Solution |
|---|---|
| Suction still weak right after the filter change | Take the filter out and refit it until it audibly clicks or sits firmly — a filter that is not fully seated lets air slip past it. Empty the bin or container as well. |
| Dusty or damp smell after washing | The filter went back in before it was fully dry. Take it out and give it the full 24–48 hours of air-drying — a damp filter can also damage the motor. |
Frequently asked questions
Does the Plutoos PL13151 fit all the models listed?
Yes — it is a drop-in fit for Philips SpeedPro, SpeedPro Aqua, FC8009, FC8010. No tools, no modification needed.
How often should the filter be changed?
Every 3 to 6 months, depending on how often you vacuum. When suction drops or the device's filter indicator triggers, it is time for a fresh filter. With regular washing, replace it once it stays grey after rinsing — depending on use every 6–12 months.
Is the filter suitable for allergy sufferers?
Yes — it reaches HEPA class and captures fine particles from 0.3 µm: pollen, dust-mite allergens, pet hair and fine dust stay in the filter instead of being blown back into the room. Clean exhaust air matters particularly to allergy sufferers.
Does compatible replacement void my vacuum's warranty?
No. Under EU and Swiss consumer law, using compatible spare parts can only affect your vacuum's warranty if the part demonstrably causes damage.
How fast is delivery?
Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.
| Compatible device brand: | Philips |
|---|---|
| Compatible device series: | Philips SpeedPro, Philips SpeedPro Aqua |
| Accessory type: | Vacuum cleaner replacement filter |
| Compatible device models: | Philips FC6721, Philips FC6722, Philips FC6723, Philips FC6724, Philips FC6725, Philips FC6726, Philips FC6727, Philips FC6728, Philips FC6729, Philips SpeedPro, Philips SpeedPro Aqua |
| Manufacturer: | Plutoos |
Similar Items
![Plutoos 3 Filter für Kärcher Staubsauger [WD4, WD5, WD6 / MV4, MV5, MV6] – 3 Flachfaltenfilter](https://plutoos.ch/media/c0/a6/4c/1747628519/pl11730.jpg?ts=1750100859 "PL11730")
