Plutoos 3 × Flat Pleated Filters for Kärcher WD4 WD5 WD6 MV4 MV5 MV6 – washable, replaces 2.863-005.0
![Plutoos 3 Filter für Kärcher Staubsauger [WD4, WD5, WD6 / MV4, MV5, MV6] – 3 Flachfaltenfilter](https://plutoos.ch/media/c0/a6/4c/1747628519/pl11730.jpg?ts=1750100859 "PL11730")
CHF 35.90
Free shipping
Available, delivery time: Next-day delivery*
shipping
delivery*
guarantee
returns
payments
Plutoos 3-Pack Flat Pleated Filters for Kärcher WD 4 / WD 5 / WD 6 — a spare always at hand
Replaces Kärcher 2.863-005.0 (KFI 4410) – fits WD 4–WD 6 · MV 4–MV 6 incl. Premium variants – washable & reusable
✓ Replaces Kärcher 2.863-005.0 (KFI 4410)💧 Wet & dry vacuuming — no filter change🧼 Washable & reusable — 3 per pack🇨🇭 Swiss stock
This Plutoos flat pleated filter is the compatible replacement for the Kärcher original 2.863-005.0 (KFI 4410). It sits drop-in in the filter cassette and holds back fine particles — fine dust, pollen and mites stay in the filter instead of the room air, tested and certified to DIN 44956. One filter for wet and dry vacuuming: no filter change between water and dust, and suction stays at full strength.
Renovation, workshop, garage: when drilling and sanding dust packs the pleats, the 3-pack means the spare is already on the shelf — fresh filter in, back to work. Washable and reusable: rinse it out, tap it out, let it dry fully. Replace about every 6 months — sooner with lots of pet hair or fine dust; with three filters per order, supplies are always at hand.
Free dispatch from our Swiss warehouse — delivery on the next working day when in stock.
Technical data
| Property | Value |
|---|---|
| Type | Flat pleated filter |
| OEM reference | 2.863-005.0 (KFI 4410) |
| Wet & dry vacuuming | Yes — one filter for both, no change needed |
| Washable | Yes — rinse, tap out, dry fully |
| Certified | DIN 44956 |
| Recommended change | About every 6 months |
| Pack count | 3 per pack |
Compatible vacuum models
| ✓ Kärcher WD 4 · WD 4 Premium | ✓ Kärcher WD 5 · WD 5 P · WD 5 Premium · WD 5 P Premium |
| ✓ Kärcher WD 6 · WD 6 Premium · WD 6 P Premium | ✓ Kärcher MV 4 · MV 5 · MV 5 P · MV 6 |
Filter change in 4 steps
- Switch the vacuum off.
- Unlock the filter cassette and take out the old flat pleated filter.
- Insert the Plutoos filter and close the cassette until it clicks into place.
- Done — a direct replacement for 2.863-005.0 (KFI 4410), no tools needed.
Care & replacement
Rinse and tap out
Rinse the filter regularly under running water and tap dry dust out of the pleats — no soap, no brush. That keeps the pleats open and suction at full strength.
Let it dry fully
Let the filter air-dry completely before the next dry vacuuming. The synthetic material dries fast — noticeably faster than paper-based filters.
Replace about every 6 months
Even a washable filter is a wear part: replace it about every 6 months, sooner with lots of pet hair or fine dust. With the 3-pack the next filter is already on the shelf.
Troubleshooting
| Symptom | Solution |
|---|---|
| Suction still weak right after the change | Check the seat: the filter must sit fully in the filter cassette and the cassette must click shut — take it out once and refit it. |
| Musty smell while vacuuming | Rinse the filter and let it dry fully before dry vacuuming again. If the smell stays, fit the next filter from the 3-pack. |
| Dust in the exhaust air | The filter is saturated or damaged — tap it out and rinse it; if the exhaust stays dusty, replace the filter (about every 6 months). |
Frequently asked questions
Does this filter replace the original 2.863-005.0?
Yes — the Plutoos flat pleated filter is the compatible replacement for Kärcher 2.863-005.0 / KFI 4410 and sits drop-in in the filter cassette.
Can I vacuum wet and dry with the same filter?
Yes — the filter stays in the vacuum for both; no filter change is needed between wet and dry vacuuming. The synthetic material keeps working when damp and dries fast.
Which particles does the filter hold back?
Fine particles such as fine dust, pollen and mites stay in the filter instead of the room air — tested and certified to DIN 44956.
How often should the filter be replaced?
About every 6 months — sooner with lots of pet hair or fine dust. With three filters per pack, a spare is always at hand.
How fast is delivery?
Free dispatch on every order. With stock on hand, delivery on the next working day — stock level and delivery date are shown right next to the add-to-cart button.
| Kompatibel zu OEM: | 28630050 |
|---|---|
| Passende series: | KNT-Serie, KWD-Serie , MV-Serie, WD-Serie |
| Passend für Modelle: | staubsaugerfilter |
| Passend für Modelless: | KNT 4, KWD 4, KWD 5, KWD 6, MV 4, MV 5, MV 6, MV 5 Premium, MV 5 P, WD 4, WD 5, WD 6, WD6P, WD 5 Premium, WD 5 P |
| manufacturer: | Plutoos |
Similar Items
![Plutoos 3 Filter for Karcher Vacuum Cleaners [WD3, WD2, WD1, MV3, MV2, A, K, KNT, NT, SE, VC] - 1 Ro](https://plutoos.ch/media/65/c4/d8/1747603393/71nq87szbnl-_ac_sl1500_.jpg?ts=1750100855 "71nq87SzBNL-_AC_SL1500_")
