Plutoos 2 × HEPA Filters for Roborock QV 35A QV 35S QR 798 QR 598 Qrevo L
CHF 19.00
Free shipping
Available, delivery time: Next-day delivery*
shipping
delivery*
guarantee
returns
payments
Plutoos 2 × HEPA Filters for Roborock QV, QR & Qrevo L – fresh filter, clean exhaust air
For QV 35A · QV 35S · QR 798 · QR 598 · Qrevo L – multi-layer HEPA filter: 99.97 % of particles down to 0.3 µm
✓ For the listed Roborock models💨 Multi-layer HEPA filter – 99.97 % down to 0.3 µm🐾 Holds back dust, odours and pet hair🇨🇭 Swiss stock
Every one of your Roborock's rounds ends in the same place: the filter. That is where fine dust, odours and pet hair collect – quietly and reliably, until the filter is full. Then the exhaust air turns stuffy and suction noticeably drops. If your robot cleans regularly, it pays to keep a spare ready.
These Plutoos HEPA filters are the precise-fit replacement for the listed Roborock models – QV 35A, QV 35S, QR 798, QR 598 and Qrevo L: the multi-layer construction captures 99.97 % of particles down to 0.3 µm – dust, odours and pet hair stay in the filter instead of in the room air. The swap is tool-free in seconds, and with the twin pack the next filter is already waiting. Every filter is checked for fit and function before dispatch, and unopened items can be returned within 60 days – and your Roborock's exhaust air smells of nothing at all again.
Free shipping from our Swiss warehouse – next-working-day delivery.
Technical data
| Property | Value |
|---|---|
| Compatible with | Roborock QV 35A, QV 35S, QR 798, QR 598, Qrevo L |
| Type | multi-layer HEPA filter |
| Filtration | 99.97 % of particles down to 0.3 µm – dust, odours, pet hair |
| Care | tap out dry only – do not wash with water |
| Swap | tool-free, in seconds |
| Replacement interval | regularly, depending on use |
| Package contents | 2 × HEPA filter |
Compatible vacuum cleaner brands
| ✓ Roborock QV 35A | ✓ Roborock QV 35S |
| ✓ Roborock QR 798 | ✓ Roborock QR 598 |
| ✓ Roborock Qrevo L |
Swap in 3 steps
- Switch off the robot and open the filter compartment.
- Remove the old filter and insert the Plutoos HEPA filter until it sits flush; close the compartment.
- Done – no tools needed, the swap takes only seconds.
Care & cleaning
Tap out dry only
Tap the filter out dry on a regular basis – do not clean it with water or detergents.
Keep it dry
Use and store the filter dry only.
Replace regularly
Replace the filter regularly, depending on use – the twin pack keeps the next filter ready.
Troubleshooting
| Symptom | Solution |
|---|---|
| Filter does not sit properly | Check the model: these filters only fit the listed Roborock models. Insert the filter straight until it sits flush and close the compartment. |
| Suction drops | Tap the filter out dry. If performance stays weak, replace the filter – regularly, depending on use; the second filter from the twin pack is ready. |
Frequently asked questions
Which models do the filters fit?
Roborock QV 35A, QV 35S, QR 798, QR 598 and Qrevo L – please confirm your model before ordering.
Are the filters washable?
No – they are not designed for washing. Tap them out dry only and always refit them dry.
How often should I replace the filter?
Regularly, depending on use – with daily runs, sooner. With the twin pack the spare is already waiting.
How fast is delivery?
Free shipping from our Swiss warehouse – delivery the next working day.