Plutoos 953XL Yellow Ink Cartridge with Chip Compatible with HP 953 27.5 ml for OfficeJet Pro 8710 8720 7740

🖨️ 953XL Yellow: 27.5 ml — more ink than the original

With chip · replaces HP 953XL F6U18AE · up to 1,600 pages

Compatible printer models

Note on firmware updates: HP lists these printer series as 'Dynamic Security' models — manufacturer updates can detect and restrict cartridges with non-original chips, typically showing messages such as 'Non-HP Chip Detected' or 'Cartridge Problem'. Many customers and user forums report that compatible cartridges work reliably when automatic firmware updates remain switched off in the printer settings, and that rolling back an already-installed update has helped (search: printer model + 'firmware downgrade'). The decision rests solely with the customer. Newer printer firmware can restrict the recognition of compatible (non-original) cartridges. If you intend to use compatible cartridges, we recommend disabling automatic firmware updates and installing updates manually only when needed. All information without guarantee; the decision rests with the customer.

A3 construction plans, highlights, warning notes: the HP OfficeJet Pro 7740 draws yellow in long pulls. This XL cartridge pushes back — 27.5 ml versus 20.5 ml in the original, a range of up to 1,600 pages. It costs around one Rappen per page. The cartridge arrives in reused packaging: same ink, less cardboard, smaller footprint.

Package contents

Page yield per ISO/IEC 24711 (XL equivalence), 5% coverage.

Installation & first use

1. Unpack only right before installing and pull the protective strip.
2. Insert until it clicks — the chip is recognized automatically, no resetter needed.
3. Confirm the “non-genuine cartridge” notice with OK — this is normal.
4. Print a nozzle check after installation.

Care & storage

• Store sealed, upright, at 5–35 °C, away from direct sunlight — best used within 24 months.
• Print a few pages at least every 2–3 weeks so the nozzles do not dry out.
• Never leave the printer without a cartridge — the print head can dry out.
• Storing an opened cartridge: seal all open ports with the original protective tape, a tank tape or ordinary scotch tape, cover the contacts, store upright at room temperature.
• (Our advice: once opened, use the cartridge up completely rather than storing it — opened cartridges are very likely to dry out or start leaking.)

Good to know

Troubleshooting

FAQ