Plutoos 303XL Tri-Colour Ink Cartridge with Chip Compatible with HP 303 18 ml for Envy Photo 6230 7130 7830

🖨️ 303XL Tri-Colour Ink Cartridge with Chip Compatible with HP 303 for Envy Photo 6230 7130 7830

Chip recognised automatically · Plutoos premium quality · Swiss stock · fast delivery · 60-day returns

The Plutoos 303XL Tri-Colour is a compatible cartridge fitted with a recycled original HP chip, replacing the original HP 303XL (OEM reference T6N03AE) — with 18 ml significantly more ink than the original (12 ml) and a yield of up to 450 pages per ISO/IEC 24711. Ships with its recycled original HP chip: automatic recognition and ink-level display as usual.

Grandchildren's photos, invitation cards, the holiday album: the tri-colour in the HP Envy Photo 7830 carries all colour printing alone. That is why this original cartridge was refilled to 18 ml — the original fill is 12 ml — and manages up to 450 pages. That makes around 7 Rappen per page. The original HP chip signs in as always, and the cartridge gets a second life instead of a place in the bin.

Technical data

Compatible printer models

HP+ models (ending in “e”): also compatible – but only if HP+ / Instant Ink is not activated on the printer:

How to check: in the HP Smart app under printer settings, or on the printer under Settings › Printer information / on the printed printer status report (“HP+ enabled: yes/no”). If HP+ was activated during set-up, the printer accepts original HP cartridges only – this cannot be undone.

Note on firmware updates: These compatible cartridges are fitted with recycled original HP chips. Even so, HP attempts — by means of firmware updates — to identify chips that have already been in use and may block them. As reported by our customers and in user forums, it is better to keep automatic firmware updates switched off in the printer settings if you intend to use non-original cartridges. This decision rests entirely with you.

Package contents

• 1 × Plutoos 303XL (replaces T6N03AE), Tri-Colour (C+M+Y), 18 ml, up to 450 pages

Installation & first use

1. Unpack only right before installing and pull the protective strip.
2. Insert until it clicks — the chip is recognized automatically, no resetter needed.
3. Confirm the “non-genuine cartridge” notice with OK — this is normal.
4. Print a nozzle check after installation.

Care & storage

• Store sealed, upright, at 5–35 °C, away from direct sunlight — best used within 24 months.
• Print a few pages at least every 2–3 weeks so the nozzles do not dry out.
• Never leave the printer without a cartridge — the print head can dry out.
• Storing an opened cartridge: seal all open ports with the original protective tape, a tank tape or ordinary scotch tape, cover the contacts, store upright at room temperature.
• (Our advice: once opened, use the cartridge up completely rather than storing it — opened cartridges are very likely to dry out or start leaking.)
• Recycling: Return empty cartridges to us free of charge, drop them at any electronics store (e.g. Media Markt, Fust or Interdiscount) or hand them in at a recycling centre.

Good to know

• “Non-genuine cartridge” message: One-time notice — confirm with OK, printing continues normally. The printer warranty remains valid.
• Firmware updates:The chip on this cartridge is an original HP chip recovered from used original cartridges — depending on the production batch, the cartridge itself is either a professionally remanufactured original or a newly manufactured cartridge fitted with the original chip. Recognition and ink-level display work as usual. Note, however, that HP attempts to identify already-used chips through firmware updates and may block them. As reported by our customers and in user forums: keeping automatic firmware updates switched off improves the chances of trouble-free use with non-original cartridges — and where an update has already caused a blocking message, rolling the firmware back to the previous version has helped (search: printer model + 'firmware downgrade'). Whether and how you apply this is entirely your decision and responsibility — results can vary from printer to printer.
• Ink level display: The chip reports levels; on some models the display may differ slightly — the actual fill volume is not affected.

Troubleshooting

Frequently asked questions