Plutoos LC-3213 Multipack 4-Pack BK+C+M+Y with Chip Compatible with Brother LC-3213 32 ml for DCP-J572DW DCP-J772DW MFC-J895DW

🖨️ LC-3213 4-Pack BK+C+M+Y: 32 ml complete set

With chip · up to 1,600 pages total · for Brother DCP-J572DW, DCP-J772DW, MFC-J895DW

The Plutoos LC-3213 Multipack 4-Pack replaces the original Brother LC-3213 cartridges — 1× Black 11 ml, 1× each Cyan/Magenta/Yellow 7 ml: 32 ml in total with a combined yield of up to 1,600 pages per ISO/IEC 24711. Every cartridge ships with chip: automatic recognition and ink-level display as usual.

Instead of hunting down a single cartridge four times a year, you fill the Brother MFC-J895DW properly once: this XL 4-pack brings 32 ml of ink and together up to 1,600 pages. Calculated across all colours, that is around 2 Rappen per page — cheap enough that nobody rations colour printing anymore. All four chips are recognized immediately, the warranty stays untouched. Whatever stays unopened can come back within 60 days.

Compatible printer models

Note on firmware updates: As a rule, only the latest firmware versions of a printer are able to identify and restrict compatible cartridges. Many customers and user forums report that compatible cartridges keep working without interruption when automatic firmware updates remain switched off in the printer settings. The decision rests solely with the customer.

Package contents

Total: 32 ml — up to 1,600 pages. Page yield per ISO/IEC 24711, 5% coverage.

Installation & first use

1. Unpack only right before installing and pull the protective strip.
2. Insert until it clicks — the chip is recognized automatically, no resetter needed.
3. Confirm the “non-genuine cartridge” notice with OK — this is normal.
4. Print a nozzle check after installation.

Care & storage

• Store sealed, upright, at 5–35 °C, away from direct sunlight — best used within 24 months.
• Print a few pages at least every 2–3 weeks so the nozzles do not dry out.
• Never leave the printer without a cartridge — the print head can dry out.
• Storing an opened cartridge: seal all open ports with the original protective tape, a tank tape or ordinary scotch tape, cover the contacts, store upright at room temperature.
• (Our advice: once opened, use the cartridge up completely rather than storing it — opened cartridges are very likely to dry out or start leaking.)

Good to know

• “Non-genuine cartridge” message: One-time notice — confirm with OK, printing continues normally. The printer warranty remains valid.
• Firmware updates:Printer manufacturers occasionally release updates that restrict the recognition of non-original cartridges — as a rule, only the latest firmware versions are able to identify and block compatible cartridges. Many customers and user forums report that those who want to use compatible cartridges improve their chances of trouble-free operation when automatic firmware updates remain switched off in the printer settings. If an update has already been installed and messages such as “Cartridge not compatible” or “Ink level low” appear, other customers report that rolling the firmware back to the previous version has helped — instructions can be found via a Google/YouTube search for your printer model and “firmware downgrade”. We pass on these experiences of other customers in good faith; whether and how you apply them is solely your decision and responsibility — results may vary from printer to printer.
• Ink level display: The chip reports levels; on some models the display may differ slightly — the actual fill volume is not affected.

Troubleshooting

FAQ